ESF water level control cabinets operate on 380VAC, 50Hz supplies. Float-switch inputs support water supply, drainage, water-shortage protection and upper/lower tank coordination. Applications include water towers, industrial water systems, irrigation, wastewater sumps, garage drainage and textile processing.
The cabinet integrates an AC contactor and motor-protection components. Available protective functions include overload, short-circuit, water-shortage and phase-loss protection. Select the configuration for the required filling, drainage or linked-tank duty, then check the pump load, electrical wiring and float-switch signals before operation.
| Parameter | Specification |
|---|---|
| Series | ESF three-phase liquid level control cabinets |
| Rated operating supply | 380VAC, 50Hz |
| Overall dimensions | 300×250×140mm; dimensions are approximate |
| Enclosure | Indoor steel cabinet for the listed 13-series models |
| Control inputs | Float-switch level signals |
| Control arrangements | Upper tank, lower tank, water-shortage protection or linked upper/lower tanks, depending on configuration |
| Protection functions | Overload, short circuit, water shortage and phase loss |
The listed models cover pump loads up to 3kW, 5kW or 10kW. The contactor and breaker combination varies with the model; use the complete row when selecting a cabinet.
| Model | Supply phase | Maximum load | AC contactor | Circuit breaker | Mass | Function |
|---|---|---|---|---|---|---|
| ESF-1303S | Three-phase | 3kW | CJX2-1210, 380VAC | DZ47-63, 20A, 3P | 4100g | Water supply |
| ESF-1303X | CJX2-2510, 380VAC | DZ47-63, 32A, 3P | Drainage | |||
| ESF-1305S | 5kW | CJX2-3210, 380VAC | DZ47-63, 40A, 3P | 3660g | Water supply | |
| ESF-1305X | 3680g | Water supply, drainage and upper/lower tank linkage | ||||
| ESF-1310S | 10kW | 4100g | Water supply | |||
| ESF-1310X | Drainage |
ESF-1303F is the float-switch control configuration illustrated in the gallery. Its panel includes power and operation indicators, a circuit breaker and an automatic/off/manual control switch. Confirm the selected configuration's pump capacity and installed component ratings before connecting the load.
Check the wiring and float-switch operation during installation. Set the upper and lower control points for the tank arrangement, and verify water-shortage and linked-tank operation before placing the system into service.
