ELE-801F and ELE-801SF provide gauge-pressure measurement for liquids and gases compatible with PTFE and ceramic. Both use an M20×1.5 process connection and Hirschmann electrical connector. ELE-801SF adds a four-digit LCD for local indication.
| Parameter | ELE-801F | ELE-801SF |
|---|---|---|
| Configuration | Corrosion-resistant pressure transmitter | Digital corrosion-resistant pressure transmitter |
| Range selections | 20–900kPa; 1–4MPa | |
| Pressure reference | Gauge | |
| Accuracy | ±0.5% | |
| Temperature | 0–50°C | |
| Compatible media | Liquids and gases compatible with PTFE and ceramic | |
| Process thread | M20×1.5 | |
| Electrical connector | Hirschmann | |
| Output choices | Two-wire 4–20mA; three-wire 0–5V or 0–10VDC; four-wire RS485 | |
| 4–20mA supply | 10–30VDC | 15–30VDC |
| 0–10V supply | 12–30VDC | 15–30VDC |
| Overload | 1.5× full scale standard; special versions available | |
| Protection | IP65 | |
| LCD | None | 4 digits |
Choose the pressure span, display and signal configuration for the application. Check the complete wetted assembly against the actual chemical, concentration and temperature. PTFE and ceramic compatibility does not imply suitability for every corrosive liquid or gas.
