The ELE-801A family uses a hard flat diaphragm to reduce blockage when measuring adhesives, viscous liquids, slurry and particle-containing fluids. The compact 304 stainless steel housing is designed for industrial applications where abrasion, impact or buildup can affect a conventional pressure port.
The digital 801AS variant, also designated ELE-801SA, adds an LCD for local pressure readings. A diffused silicon sensing assembly, three-point calibration at zero, midpoint and full scale, and signal conditioning support pressure monitoring in hydraulic, pneumatic and process equipment.
| Parameter | ELE-801A | 801AS / ELE-801SA |
|---|---|---|
| Construction | Hard flat diaphragm | |
| Selectable pressure range | 0.5MPa to 60MPa | |
| Pressure reference | Gauge | |
| Accuracy options | ±0.2% or ±0.5% | ±0.5%; customized accuracy classes 0.2 or 0.1 available |
| Outputs | Two-wire 4–20mA; three-wire 0–5V or 0–10VDC; four-wire RS485 | |
| Supply for 4–20mA | 10–30VDC | 15–30VDC |
| Supply for 0–10V | 12–30VDC | 15–30VDC |
| Temperature | 0°C to 60°C | |
| Overload | 1.5× full scale as standard; special versions can be customized | |
| Process thread | Male M20×1.5 or G1/2; customization available | |
| Electrical connection | Hirschmann connector | |
| Housing | 304 stainless steel | |
| Media compatibility | Liquids and gases compatible with the wetted materials, including water, air, oil, hydraulic fluid, slurry and viscous or particle-containing fluids | |
| Protection | IP65 | |
| LCD | None | 4 digits as standard; selectable 5-digit indication |
The hard measuring face is intended to resist wear and impact while allowing cleaning. Industrial rubber sealing and a high-strength sealing ring help maintain the process seal. Select seal and wetted-material compatibility for the actual medium.
The internal circuit applies temperature compensation and linear correction to stabilize the output. Select the output and supply voltage together; the digital version has a 15–30VDC supply requirement for the listed current and voltage configurations.
Use the threaded connection appropriate to the vessel or pipeline and leave access to the display and connector. Apply installation torque to the hexagonal fitting, isolate and depressurize the process before removal, and protect the diaphragm against direct mechanical contact.
The English family manual includes selection guidance, current-loop and voltage wiring, RS485 connector assignments and installation precautions. Follow the supplied nameplate and configured connector mapping when commissioning the transmitter.
