ELE-3051TL measures liquid level from gauge pressure at a single flange connection. A monocrystalline silicon sensor provides two-wire 4–20mA with HART communication. Flange sizes and wetted material choices allow the transmitter to be selected for the tank connection and liquid.
| Parameter | ELE-3051TL |
|---|---|
| Type | Single-flange level transmitter |
| Range selections | 1–400mH₂O |
| Pressure reference | Gauge |
| Sensor | Monocrystalline silicon |
| Process flange options | DN25, DN50, DN80 or DN100 |
| Compatible liquids / wetted material choices | 316 stainless steel, Hastelloy C, Monel, tantalum or PTFE |
| Output | Two-wire 4–20mA with HART |
| Supply | 10.5–42VDC |
| Accuracy options | ±0.075% to ±0.2% |
| Temperature | -20–60°C |
| Turndown ratio | 10:1 |
| Overload options | 2, 4, 20 or 60MPa, selected by configuration |
| Electrical entry | M20×1.5 |
| Explosion-protection designation | Ex d IIC T6 Gb |
Specify the liquid, calibrated head range, flange size, wetted material and required accuracy. The mH₂O range expresses water-equivalent pressure head; the level calibration must account for the measured liquid's density. Select the complete flange assembly and overload configuration for the process pressure.
