ELE-3051DP combines a monocrystalline silicon sensor with two-wire 4–20mA and HART communication. The 10:1 turndown ratio supports calibrated span selection. Wetted material choices accommodate liquids compatible with 316 stainless steel, Hastelloy C, Monel, tantalum or PTFE.
| Parameter | ELE-3051DP |
|---|---|
| Pressure type | Differential |
| Range selections | ±100–900Pa; ±1–900kPa; 1–6.9MPa |
| Sensor | Monocrystalline silicon |
| Output | Two-wire 4–20mA with HART |
| Supply | 10.5–42VDC |
| Accuracy options | ±0.075% to ±0.2% |
| Temperature | -20–60°C |
| Turndown ratio | 10:1 |
| Static-pressure rating options | 1.5–60MPa |
| Overload options | 2, 4, 20 or 60MPa |
| Compatible liquids / wetted material choices | 316 stainless steel, Hastelloy C, Monel, tantalum or PTFE |
| Process connection | Male M20×1.5 |
| Rear drain port | Female NPT1/4 |
| Electrical entry | M20×1.5 |
| Protection | IP65 |
Select the differential span, static-pressure capability and overload rating together. These ratings describe different pressure conditions. Choose wetted materials for the actual liquid and operating temperature, then specify the required accuracy and calibrated range.
