ELE-211 to ELE-217 Micro Differential Pressure Transmitters

Description

Low differential pressure measurement for gases

This family measures differential pressure in noncorrosive gases. ELE-211 configurations provide signal transmission without an LCD. ELE-212, ELE-214, ELE-215 and ELE-217 include a digital display configuration. Select the fitting, range and output for the pneumatic connection and receiving instrument.

Models, ranges and pneumatic connections

ModelRange selectionsProcess connectionLCD configuration
ELE-211N±100–900Pa; ±1–100kPaPC8 pneumatic fitting; Ø8×5mm tubingNone
ELE-211-BBarbed fitting; Ø10×6.5mm tubing
ELE-211-CPC8 quick connector; Ø8×5mm tubing
ELE-212-BBarbed fitting; Ø10×6.5mm tubing4 digits by default; selectable 5-digit mode
ELE-212-CPush-in fitting; Ø8×5mm tubing
ELE-212-NPC8 pneumatic fitting; Ø8×5mm tubing
ELE-214±100–900Pa; -1–35kPaØ8×5mm tubing
ELE-215±100–900Pa; ±1–35kPa
ELE-217

Electrical configurations

ModelsOutput choices4–20mA supplyVoltage-output supply
ELE-211N, ELE-211-B, ELE-211-C, ELE-212-B, ELE-212-C, ELE-212-N, ELE-214Two-wire 4–20mA; three-wire 0–5V or 0–10VDC; four-wire RS48510–30VDC12–30VDC
ELE-21512–30VDC
ELE-217Two-wire 4–20mANot applicable

Shared specifications

ParameterAll listed models
Pressure typeDifferential
Measured mediumNoncorrosive gas
Accuracy options±0.2% or ±0.5%
Temperature0–50°C
Overload1.5× full scale standard; special configurations available
Static-pressure rating2× full scale
Electrical terminationEuropean terminal, 0.5mm²

Selection considerations

Choose a calibrated span within the model's range selections. Tube dimensions are outside diameter × inside diameter. The static-pressure limit and differential-overload limit describe different conditions. ELE-217 is a current-output model; voltage and RS485 options belong to the other listed models.