XI cabinets are floor-standing steel enclosures for indoor control installations. The integrally welded five-fold frame is intended for standalone use and is not designed for cabinet baying. Mounting holes at 25mm intervals support flexible component positioning.
The door stands approximately 25mm above the ground and uses removable square-tube reinforcement. The galvanized mounting plate slides into the cabinet on guides, with U-shaped side flanges for handling and stiffness. A three-section cable-entry arrangement accommodates the bottom cable layout.
| Parameter | Specification |
|---|---|
| Material | Cold-rolled sheet steel |
| Protection ratings | IP55; IK10 impact resistance; NEMA3S enclosure rating |
| Finish | Etch primer and textured epoxy-polyester powder coating |
| Colors | RAL7032, RAL7035 or custom color |
| Frame and body thickness | 1.5mm |
| Door thickness | 2mm |
| Rear panel thickness | 1.5mm |
| Mounting plate thickness | 2.5mm |
| Mounting plate finish | Galvanized |
| Included parts | Cabinet body, front door, hinges, handle-lock system, sealing strip, rear panel, mounting plate, top cover, removable bottom cable-entry panels and four lifting eyebolts |
Dimensions below are cabinet width, height and depth. Nonstandard sizes can be specified for the installation.
| Model | Width (mm) | Height (mm) | Depth (mm) |
|---|---|---|---|
| XI6016040 | 600 | 1600 | 400 |
| XI6016050 | 500 | ||
| XI6018040 | 1800 | 400 | |
| XI6018050 | 500 | ||
| XI6020050 | 2000 | 500 | |
| XI8016050 | 800 | 1600 | 500 |
| XI8018040 | 1800 | 400 | |
| XI8018050 | 500 | ||
| XI8020050 | 2000 | 500 | |
| XI8020060 | 600 | ||
| XI10015040 | 1000 | 1500 | 400 |
| XI12016050 | 1200 | 1600 | 500 |
| XI12018040 | 1800 | 400 | |
| XI12020050 | 2000 | 500 |
