| Part Number: | VM2 | 3 | 0 | - | 02 | - | 01 | (S) |
|---|---|---|---|---|---|---|---|---|
| Explanation: |
Series VM2 - VM200 mechanical valve family |
Port Count 2 - Two-port valve |
Fixed Model Code 0 - Fixed digit in the VM220 and VM230 model designations |
Connection Size 02 - PT1/4 ports |
Actuator 00 - Basic plunger |
Actuator Mark Blank - Omit the optional actuator mark |
VM200 mechanical valves provide two-port or three-port control for air and inert gases through PT1/4 connections. Choose a plunger, roller, button, selector or foot lever to suit the required operating action. The two-port and three-port codes describe the valve connections; the two-position and three-position selector options describe the actuator.
| Parameter | Specification |
|---|---|
| Working medium | Air and inert gases |
| Operating pressure | 0–0.8MPa |
| Ambient and fluid temperature | -5–60°C, without freezing |
| Effective sectional area | 19mm² |
| Cv | 1.0 |
| Connection | PT1/4 |
| Lubrication | Not required; use ISO VG32 oil if lubrication is supplied |
The designation combines VM2, the port-count code, the fixed 0, connection code 02, actuator code and any applicable actuator suffix. VM230-02-01(S) identifies the three-port version with PT1/4 connections and a hard-steel roller lever.
| Code field | Code | Selection |
|---|---|---|
| Port count | 2 | Two ports |
| 3 | Three ports | |
| Connection | 02 | PT1/4 |
| Actuator suffix | S | Hard-steel roller |
| R | Red button | |
| B | Black button | |
| G | Green button | |
| Y | Yellow button |
| Actuator code | Operating head |
|---|---|
| 00 | Basic type |
| 01 | Roller lever |
| 02 | Unidirectional roller lever |
| 05 | Straight plunger |
| 06 | Roller plunger |
| 07 | Transverse plunger |
| 08 | Toggle |
| 30 | Mushroom button |
| 32 | Raised button |
| 33 | Flat button |
| 34 | Two-position selector knob |
| 35 | Three-position selector knob |
| 36 | Two-position locking selector knob |
| 40 | Foot lever |
| Illustrated actuator | Operating force at 0.5MPa | Pretravel | Overtravel | Total travel |
|---|---|---|---|---|
| Basic type 00 | 52N | 3mm | 2mm | 5mm |
| Roller lever 01 | Not specified | 6.5mm | 4.5mm | 11mm |
| Unidirectional roller 02 | 7mm | 5mm | 12mm | |
| Three-position selector 35 | 40N | Not specified | Not specified | 45° |
| Foot lever 40 | 65N | 1.2° |
Use the drawing for the selected head when checking mounting clearances. The selector requires a 30.5mm panel opening and accepts a panel up to 6mm thick. Its shared outline also labels the VM250 five-port version; the additional exhaust holes marked for five ports do not apply to the two-port and three-port configurations above.
