| Part Number: | UV | - | EC | - | D16C16 | P |
|---|---|---|---|---|---|---|
| Explanation: |
Platform UV - Vertical integrated I/O module |
Protocol PN - PROFINET |
I/O Configuration D16C16 - 16 digital inputs accepting NPN or PNP signals and 16 digital outputs; fixed configuration in this series |
Output Polarity P - PNP outputs |
Each UV vertical integrated module combines 16 digital inputs, 16 digital outputs and a network interface in a 24mm-wide DIN rail housing. Inputs accept NPN or PNP signals; the final P or N in the model identifies the output polarity. Select the required protocol and output type together. Each listed model is a separate protocol variant.
| Protocol | PNP output model | NPN output model | Inputs / outputs |
|---|---|---|---|
| PROFINET | UV-PN-D16C16P | UV-PN-D16C16N | 16 / 16 |
| EtherCAT | UV-EC-D16C16P | UV-EC-D16C16N | |
| EtherNet/IP | UV-EIP-D16C16P | UV-EIP-D16C16N | |
| CC-Link IE Field Basic | UV-CB-D16C16P | UV-CB-D16C16N | |
| Modbus TCP | UV-MT-D16C16P | UV-MT-D16C16N |
| Models | Transmission rate | Interface data capacity | Addressing |
|---|---|---|---|
| UV-PN models | 10/100Mbps, full duplex | 1024 bytes maximum | PROFINET specification |
| UV-EC models | 100Mbps | EtherCAT specification | |
| UV-EIP models | EtherNet/IP specification | ||
| UV-CB models | RX and RY: 64 bits each; RWr and RWw: 32 words each, per logical station | Not specified here | |
| UV-MT models | 1024 bytes maximum | Modbus TCP specification |
Interface capacity is separate from the physical channel count. The PROFINET models use separate two-byte input and two-byte output images, detailed below.
| Property | Specification | Applies to |
|---|---|---|
| Station type and occupancy | Remote I/O station; 1 station | All models |
| Communication distance | ≤100m | |
| Topology | Bus topology | |
| Transmission medium | Ethernet CAT5 cable | |
| Network isolation | Electrical isolation | |
| Periodic-data / node-search ports | 61450 / 61451 | UV-CB models |
| PROFINET functions | RT, declared Class C conformity, MRP, automatic addressing and topology detection | UV-PN models |
| Alarms | Diagnostic alarms and process alarms |
| Input characteristic | Specification | Scope |
|---|---|---|
| Input channels | 16 | All models |
| Signal types | NPN and PNP | |
| PNP input ON / OFF | 15-30V / -3V to +3V | |
| NPN input ON / OFF | -3V to +3V / 15-30V | |
| Typical input current | 4mA at 24V | UV-PN-D16C16P and UV-PN-D16C16N |
| 3mA | UV-EC, UV-EIP, UV-CB and UV-MT models listed above | |
| Input voltage grade | 24VDC, ±10% | UV-PN-D16C16P and UV-PN-D16C16N |
| Output configuration | Channels | ON state | OFF state |
|---|---|---|---|
| PNP sourcing, models ending in P | 16 | 24VDC, ±25% | Nominal 0VDC; ±3% tolerance with unspecified reference quantity |
| NPN sinking, models ending in N | Nominal 0VDC; ±3% tolerance with unspecified reference quantity | 24VDC, ±25% |
The low-state ±3% notation does not establish an absolute residual-voltage limit because its reference quantity is unspecified. PNP outputs supply loads connected to the 0VDC return; NPN outputs switch loads connected to the positive field supply.
| Connection and protection | Inputs | Outputs |
|---|---|---|
| Connection arrangement | 1-wire | |
| Reverse-circuit protection | Provided | |
| Field-layer isolation | Optical isolation | |
| Module error diagnosis | Provided | |
Module error diagnosis is distinct from individual port abnormality detection. The PROFINET software functions are listed separately below.
| Parameter | All models |
|---|---|
| Installation envelope, depth × width × height | 80 × 24 × 115mm |
| Mounting | 35mm DIN rail, vertical installation |
| Protection / pollution degree | IP20 / 2 |
| Operating temperature | -10°C to +55°C |
| Storage temperature | -20°C to +85°C |
| Relative humidity | 5-95%RH, non-condensing |
The upright outline for the two PROFINET models gives a 110mm body height, 24mm width and 80mm depth. The 115mm installation height includes the projecting parts beyond the body dimension.
The detailed supply, wiring, indicator, process-data and installation information that follows applies to UV-PN-D16C16P and UV-PN-D16C16N.
| Model | System feed current | Working supply |
|---|---|---|
| UV-PN-D16C16P | 135mA | 24VDC, +20%/−15% |
| UV-PN-D16C16N | 115mA |
| Connection property | Both PROFINET models |
|---|---|
| Terminal technology | Push-in spring terminals; solid conductors can be inserted directly |
| Power, input and output conductor cross-section | 0.34-1.5mm² |
| Conductor size | 22-16AWG |
| Strip length | 8-10mm |
| Power interface | 3-position terminal |
| Rail fixing | Slot and latch for 35mm DIN rail |
| Input signal | A terminal | B terminal | Input signal |
|---|---|---|---|
| Input 00 | A1 | B1 | Input 10 |
| Input 01 | A2 | B2 | Input 11 |
| Input 02 | A3 | B3 | Input 12 |
| Input 03 | A4 | B4 | Input 13 |
| Input 04 | A5 | B5 | Input 14 |
| Input 05 | A6 | B6 | Input 15 |
| Input 06 | A7 | B7 | Input 16 |
| Input 07 | A8 | B8 | Input 17 |
| SS common | A9 | B9 | SS common |
| A10 | B10 |
The four SS terminals are internally connected. Connect SS to 0V for PNP input operation, or to +24V for NPN input operation. This is a shared input common; the terminals do not provide independently selectable common voltages for individual channels.
| Output signal | C terminal | D terminal | Output signal |
|---|---|---|---|
| Output 00 | C1 | D1 | Output 10 |
| Output 01 | C2 | D2 | Output 11 |
| Output 02 | C3 | D3 | Output 12 |
| Output 03 | C4 | D4 | Output 13 |
| Output 04 | C5 | D5 | Output 14 |
| Output 05 | C6 | D6 | Output 15 |
| Output 06 | C7 | D7 | Output 16 |
| Output 07 | C8 | D8 | Output 17 |
| Field +24V | C9 | D9 | Field +24V |
| Field 0V | C10 | D10 | Field 0V |
Supply the field terminals externally. The labels 00-07 and 10-17 each identify a group of eight channels, separately for inputs and outputs.
| Insulated ferrule | Conductor cross-section | Ferrule length L |
|---|---|---|
| E0310 | 0.3mm² | 10mm |
| E0510 | 0.5mm² | |
| E7510 | 0.75mm² | |
| E1010 | 1.0mm² | |
| E1510 | 1.5mm² |
| Indicator | Colour and state | Meaning |
|---|---|---|
| PWR | Green on | Normal supply |
| Off | No supply or abnormal supply | |
| RUN | Green on | System operating normally |
| Off | Abnormal operation | |
| Flashing | Factory reset after holding the button for 10 seconds | |
| SYS | Red off | No module fault |
| Red on | Module fault; currently indicates a bus fault | |
| ERR | Red off | Network connection normal |
| Red flashing | Network connection abnormal | |
| Channel LEDs, 00-07 and 10-17 | Green on / off | Corresponding channel active / inactive |
| Data direction | Byte | Bit 7 | Bit 6 | Bit 5 | Bit 4 | Bit 3 | Bit 2 | Bit 1 | Bit 0 |
|---|---|---|---|---|---|---|---|---|---|
| Input | 0 | DI07 | DI06 | DI05 | DI04 | DI03 | DI02 | DI01 | DI00 |
| 1 | DI17 | DI16 | DI15 | DI14 | DI13 | DI12 | DI11 | DI10 | |
| Output | 0 | DO07 | DO06 | DO05 | DO04 | DO03 | DO02 | DO01 | DO00 |
| 1 | DO17 | DO16 | DO15 | DO14 | DO13 | DO12 | DO11 | DO10 |
Input bits are 1 for an active input and 0 for an inactive input. Output bits are 1 to activate the corresponding output and 0 to deactivate it. An active PNP output is high; an active NPN output is low. Input and output byte offsets belong to separate process images.
| Software function | Both PROFINET models |
|---|---|
| Fault-stop output state | Retain current value |
| Input-port abnormality detection and indication | Not provided |
| Output-port abnormality detection and indication | Not provided |
| Configurable input and output logic levels | Not supported |
| Independent channel-enable configuration | Not supported |
| Configurable diagnostic reporting | Not supported |
| Stopped mode | Follow the fault-stop state mode and preset value; no further refresh |
| I/O access | Bit, byte and word access |
| Parameter | Specification |
|---|---|
| Altitude | Below 2000m; 80kPa reference |
| Overvoltage category | II |
| Power-line immunity | 2kV, IEC 61000-4-4 |
| EMC environment | Zone B, IEC 61131-2 |
| Vibration | IEC 60068-2-6: 5-8.4Hz at 3.5mm amplitude; 8.4-150Hz at 9.8m/s²; X, Y and Z axes, 100 minutes per axis in ten 10-minute cycles |
| Shock | IEC 60068-2-27: 9.8m/s², 11ms; three shocks in each of six directions across the X, Y and Z axes |
| Declared conformity | CE; supporting certificate number not specified here |
| Installation clearances | 10mm between modules; 45mm above and 25mm below |
Install vertically in a ventilated enclosure or cabinet, away from equipment that could cause overheating. Disconnect power before fitting or removing the module. Engage the upper rail latch and seat the module on the DIN rail. For removal, disconnect power and signal cables, release the latch with a flat screwdriver and reverse the mounting movement. Check for obstructions if the module resists fitting.
| UL use group | Rated current | Rated voltage | Rated cross-section |
|---|---|---|---|
| B | Not specified | Not specified | Not specified |
| C | |||
| D |
