| Part Number: | ULO | - | USB496 | - | B | N | C |
|---|---|---|---|---|---|---|---|
| Explanation: |
Brand |
Model |
Housing Colour W - White |
Shell Plating 6 - Tin |
Contact Plating 0 - Selective gold flash |
USB496 is a four-contact USB Type B male plug component set for solder-wire connections. The contact housing and separate formed shell pieces have individual dimensional views for planning the termination and enclosure assembly.
| Characteristic | Value |
|---|---|
| Interface | Type B male; 4 contacts |
| Termination | Solder wire |
| Nominal contact pitch | 2.5mm; a second-axis pitch is unspecified |
| Rated current | 1.5A |
| Rated voltage | 30V; AC/DC designation unspecified |
| Contact resistance | ≤50mΩ |
| Insulation resistance | 100MΩ; minimum/maximum designation unspecified |
| Dielectric withstand test | 100VAC for 1 minute |
| Insulator | PA66; material group I; UL94V-0 |
| Contact material | Copper alloy |
The dielectric test condition is separate from the rated voltage. Wire gauge, cable-diameter range, USB generation and data rate are unspecified.
The three fields after USB496 specify housing colour, shell plating and contact plating.
| Field | Code | Selection |
|---|---|---|
| Housing colour | W / B | White / black |
| Shell plating | 6 / N / 8 | Tin / nickel / full gold |
| Contact plating | 0 / C / 3 | Selective gold flash / 3µin gold / 30µin gold |
The following dimensions refer to the individual components and views in the drawing. Formed cable-end features do not establish a specified cable clamping range.
| Component or view | Reference | Dimension |
|---|---|---|
| Contact housing | Length / front width | 21mm / 7.3mm |
| Contact housing | Front opening references | 4.7mm wide; 1.9mm vertical gap |
| Contact housing | Contact-end references | 4mm front longitudinal reference; 7.5mm side reference |
| Contact housing | Side widths | 5.1mm upper reference; 6.5mm body reference |
| Short shell component | Length / body width | 21.6mm / 8mm |
| Short shell component | Formed side references | 6.8mm upper width; 7mm lower width and end height reference |
| Long shell component | Overall length | 36.7mm |
| Long shell component | Side longitudinal references | 5.1mm and 15.1mm |
| Long shell component | End envelope | 8×7.2mm |
