| Part Number: | ULO | - | USB495 | - | B | N | C |
|---|---|---|---|---|---|---|---|
| Explanation: |
Brand |
Model |
Housing Colour W - White |
Shell Plating N - Nickel |
Contact Plating 0 - Selective gold flash |
USB495 is a four-contact USB Type A male plug component set for solder-wire termination. Its dimensional layout separates the housing with contacts, upper shell and lower shell. Select the housing colour and plating, and use the component drawings to plan the cable termination and shell assembly.
| Characteristic | Value |
|---|---|
| Interface | Type A male; 4 contacts |
| Termination | Solder wire |
| Rated current | 1.5A |
| Rated voltage | 30V; AC/DC designation unspecified |
| Contact resistance | ≤50mΩ |
| Insulation resistance | 100MΩ; minimum/maximum designation unspecified |
| Dielectric withstand test | 100VAC for 1 minute |
| Insulator | PA66; material group I; UL94V-0 |
| Contact material | Copper alloy |
The dielectric test value is separate from the rated voltage. Wire gauge, cable-diameter range, USB generation and data rate are unspecified.
The three fields after USB495 specify housing colour, shell plating and contact plating.
| Field | Code | Selection |
|---|---|---|
| Housing colour | W / B | White / black |
| Shell plating | N / 6 | Nickel / tin |
| Contact plating | 0 / C / 3 | Selective gold flash / 3µin gold / 30µin gold |
The measurements below are component references. They do not define an assembled cable diameter or a PCB footprint.
| Component | Reference | Dimension |
|---|---|---|
| Housing with contacts | Longitudinal reference | 21.80mm |
| Housing with contacts | Width / internal width reference | 11.30mm / 9.30mm |
| Housing with contacts | Contact outer span / middle-pair spacing | 7mm / 2mm |
| Housing with contacts | Side and end references | 2.70mm end thickness; 1.80mm and 2.30mm side offsets; 8.90mm contact-area reference |
| Upper shell | Longitudinal references | 20.20mm / 19.20mm; 10.30mm lower-body reference |
| Upper shell | Width references | 12.90mm overall end width; 11.38mm formed opening; 10.80mm lower width |
| Upper shell | Side / forming references | 8.30mm and 4.10mm side dimensions; 4.50mm end height; R3.25mm forming radius; 0.80mm tab reference |
| Lower shell | Overall / main-body length references | 36.80mm / 31.5mm |
| Lower shell | Width / height references | 12mm body width; 4.50mm side height |
| Lower shell | Rear tab references | 4.40mm width; 4.20mm length; 1.60mm side step |
| Lower shell | Other longitudinal references | 27.80mm, 22.90mm, 17.5mm and 14mm |
| Lower shell | Window references | 6mm spacing; 2mm opening dimension; 5.16mm edge reference |
