| Part Number: | ULO | - | USB484 | - | B | N | R | 03 |
|---|---|---|---|---|---|---|---|---|
| Explanation: |
Brand |
Model |
Housing Colour W - White |
Shell Plating N - Nickel |
Mounting R - Right-angle through-hole |
Contact Plating 0 - Selective gold flash |
USB484 combines two USB Type A female ports in one right-angle through-hole connector. Each port has four contacts, giving eight signal tails. Four shell mounting legs locate and retain the stacked assembly on the PCB.
| Characteristic | Value |
|---|---|
| Port arrangement | Two vertically stacked Type A female sockets |
| Contacts | 4 per port; 8 total |
| Mounting | Right-angle through-hole |
| Rated current | 1.5A |
| Rated voltage | 30V; AC/DC designation unspecified |
| Contact resistance | ≤50mΩ |
| Insulation resistance | 100MΩ; minimum/maximum designation unspecified |
| Dielectric withstand test | 100VAC for 1 minute |
| Insulator | PA66; material group I; UL94V-0 |
| Contact material | Copper alloy |
The dielectric test value is separate from the working-voltage rating. A combined current allowance for both ports, USB generation, data rate and charging protocol are unspecified.
The ordering fields after USB484 are housing colour, shell plating, mounting type and contact plating.
| Field | Code | Selection |
|---|---|---|
| Housing colour | W / B | White / black |
| Shell plating | N / 6 | Nickel / tin |
| Mounting type | R | Right-angle through-hole |
| Contact plating | 0 / 03 / 30 | Selective gold flash / selective gold 3µin / selective gold 30µin |
| Reference | Dimension |
|---|---|
| Body length / width / height | 17.6×14.4×15.6mm |
| Front overall height including retention | 19.6mm |
| Lower mounting spread | 15.6mm |
| Contact tail reference | 3.2mm |
| Signal holes | Eight Ø0.92mm holes in two rows of four |
| Signal-hole spacing within each row | 7mm outer centre span; 2mm between the middle pair |
| Signal row separation | 2.62mm |
| Shell mounting holes | Four Ø2.30mm holes |
| Shell-hole centre pattern | 13.14×5.68mm |
| Shell-row to first signal-row offset | 2.71mm |
| Additional side reference | 12.4mm longitudinal reference in the side view |
| PCB layout tolerance | ±0.05mm |
