| Part Number: | ULO | - | UC501 | - | B | N | C |
|---|---|---|---|---|---|---|---|
| Explanation: |
Brand |
Model |
Housing Colour B - Black |
Shell Plating N - Nickel |
Contact Plating O - Selective gold flash |
UC501 has a keyed female mating interface, six contacts in two rows of three, a metal shell and rear contact tails aligned with the connector body. Front and rear views show the contact insert, retention springs and projecting shell tab. Select the mating and termination arrangement using the dimensions below.
| Characteristic | UC501 |
|---|---|
| Contact arrangement | 6 contacts; two rows of three |
| Mating role | Female socket |
| Terminal arrangement | Straight rear contact tails |
| Rated current | 1.5A |
| Rated voltage | 30V; AC/DC designation unspecified |
| Contact resistance | ≤50mΩ |
| Insulation resistance | 100MΩ; minimum/maximum designation unspecified |
| Dielectric withstand test | 100VAC for 1 minute |
| Insulator | PA66; material group I; UL94V-0 |
| Contact material | Copper alloy |
A specific mating counterpart, data rate and protocol revision are unspecified. No recommended PCB drilling or pad pattern is provided. The dielectric withstand condition is a test value, separate from the rated working voltage.
The three selection fields after UC501 identify housing colour, shell plating and contact plating.
| Field | Code | Selection |
|---|---|---|
| Housing colour | B | Black |
| Shell plating | N | Nickel |
| 6 | Tin | |
| Contact plating | O | Selective gold flash |
| C | Selective 3µin gold |
Dimensions are in millimetres. The two adjacent mating-contact spacings are individually dimensioned at 2.00mm and 2.02mm; the rear contact spacings are both 2.00mm. These references describe different portions of the formed contacts.
| Dimension or feature | UC501 |
|---|---|
| Mating opening width and height | 11.30mm × 6.20mm |
| Inner lateral reference | 6.90mm |
| Adjacent mating-contact spacings | 2.00mm and 2.02mm |
| Mating-contact row spacing | 1.58mm |
| Front-view contact references | Pin 1 at the lower left; Pin 5 at the lower right |
| Outer flange width | 13.50mm |
| Body length; rear-tail length reference | 14.80mm; 17.00mm |
| Shell side width | 8.40mm |
| Projecting shell-tab reference | 3.10mm beyond the body |
| Rear adjacent contact spacings | 2.00mm and 2.00mm |
