| Part Number: | ULO | - | TB30 | - | 2KR | / | 5.08 | - | 02 | P | - | 4 | 000A |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Explanation: |
Manufacturer ULO - ULO Electronics |
Series TB30 - 5.08mm screw terminal plugs |
Plug Type 2KR - Standard plug |
Pitch 5.08 - 5.08mm |
Poles 02–24 - 2–24 poles, written with two digits |
Pole Unit P - Poles |
Color 1 - Grey |
Customer Code 000A - Fixed customer requirements code shown in the drawings |
TB30 2KR plugs provide one contact row at 5.08mm pitch with screw wire termination. Select 2–24 poles and the required fixing arrangement. The KRZM is a separate insulating mounting frame; it has no stated electrical rating or wire termination.
| Model | Configuration | Wire-clamp screw | Wire-clamp torque | Strip length |
|---|---|---|---|---|
| TB30-2KR/5.08 | Plain plug | M3 | 0.5N·m | 7mm |
| TB30-2KRP/5.08 | Plug with brass end fixing nuts | |||
| TB30-2KRM/5.08 | Plug with end fixing screws | |||
| TB30-2KRF/5.08 | Plug with mounting flanges | M2.5 | 0.4N·m | 7mm, within the 7–8mm range |
| TB30-2KRPF/5.08 | Plug with mounting flanges and brass end fixing nuts | |||
| TB30-2KRZM/5.08 | Separate insulating mounting frame | Not applicable | ||
KRM end fixing screws are M2.5 with a tightening torque of 0.4N·m, separate from its M3 wire-clamp screws. Fixing thread sizes for KRP and KRPF are unspecified. Mating compatibility requires checking contact geometry, keying and fixing dimensions.
All five conducting plug models are rated 20A, 320V under overvoltage category III and pollution degree 2. Select the model-specific rated impulse voltage below.
| Model | Overvoltage category | Pollution degree | Rated voltage | Rated impulse voltage |
|---|---|---|---|---|
| 2KR | III | 2 | 320V | 2.5kV |
| 2KRP | 4kV | |||
| 2KRM | 2.5kV | |||
| 2KRF and 2KRPF | 4kV |
Ratings for category III/pollution degree 3 and category II/pollution degree 2 are unspecified. KRZM has no IEC voltage, current or impulse rating.
| Model | Use group B | Use group C | Use group D | UL wire range |
|---|---|---|---|---|
| 2KR, 2KRP and 2KRM | 15A, 300V | Not specified | 10A, 300V | 28–12AWG |
| 2KRF and 2KRPF | 28–16AWG | |||
| 2KRZM | Not applicable to the insulating frame | |||
2KRF and 2KRPF also have a general UL-standard notation of 16A, 300V without a use group; this does not extend the B or D limits above. Their dielectric withstand test is 1600VAC for 1 minute. Equivalent wire-clamp torque notations are 4.43lb·in for M3 plugs and 3.54lb·in for the M2.5 F/PF plugs.
| Model | IEC conductor cross section | Conductor types |
|---|---|---|
| 2KR | 0.2–2.5mm² | Solid, flexible or flexible with ferrule |
| 2KRP | 1.0–2.5mm² | |
| 2KRM | ||
| 2KRF and 2KRPF | 0.2–2.5mm² |
IEC conductor ranges and UL wire ranges apply under their respective rating systems. Select the wire size for the circuit current and termination requirements.
| Characteristic | Conducting plugs | KRZM frame |
|---|---|---|
| Pitch and size range | 5.08mm; 2–24 pole sizes | |
| Housing or frame material | PA66, insulation material group I, UL94V-0 | |
| Cover | PA66, UL94V-0 | Not specified |
| Contact pins | Brass, tin plated | No contacts specified |
| Clamping cage | Brass, nickel plated | Not applicable |
| Wire-clamp screw | Zinc-plated steel; M3 for KR/P/M, M2.5 for F/PF | Not applicable |
| End fixing nuts | Brass on KRP and KRPF | Not specified |
| Protection level | IP20 | |
| Operating temperature | -40°C to +105°C | |
| Material compliance | RoHS compliance declared | Not specified |
Certificate file numbers are unspecified.
| Field | Meaning |
|---|---|
| Series | TB30 |
| Model | 2KR, 2KRP, 2KRM, 2KRF, 2KRPF or 2KRZM, followed by /5.08 |
| Pole field XXP | 02–24P |
| Colour field Y | 1 grey; 2 blue; 3 black; 4 green; 5 orange; 6 red; 7 transparent; 8 yellow; 9 white |
| Customer suffix | 000A shown in the model drawings |
| General screw-head field | 0 slot; 1 cross |
| General screw-clamping field | 0 screw down; 1 screw up |
| General standard-product field | 0A |
Use 02–24P for the selected pole size. Screw fields do not apply to the insulating KRZM frame. Illustrated products are green; not every colour and suffix combination is specified.
P is the number of poles. Formula results are in millimetres. All five conducting plugs share 5.08mm pitch, a 5.08(P−1)mm contact span, 1.00mm square pins and a 3.29mm main-body end-to-contact reference.
| KR dimension | Value |
|---|---|
| Body length | [5.08(P−1)+6.58]mm |
| Body depth | 19.20mm |
| Body height | 15.10mm |
| Dimension | KRP and KRM |
|---|---|
| Main body length | [5.08(P−1)+6.58]mm |
| End fixing centre span | [5.08(P−1)+10.16]mm |
| Overall length including fixing blocks | [5.08(P−1)+15.24]mm |
| End to first contact | 7.62mm |
| Fixing centre to adjacent contact | 5.08mm |
| Body depth, excluding projecting screw ends | 19.20mm |
| Body height | 15.10mm |
| Dimension | KRF | KRPF |
|---|---|---|
| Main body length | [5.08(P−1)+6.58]mm | |
| Overall flange length | [5.08(P−1)+19.28]mm | |
| Flange fixing centre span | [5.08(P−1)+12.88]mm | |
| Length over threaded end blocks | Not applicable | [5.08(P−1)+15.24]mm |
| Flange width at fixing hole | 8.00mm | |
| Fixing centre to rear edge reference | 12.00mm | |
| Flange-hole centre to main body end | 3.15mm | |
| Flange end to main body end | Not separately labelled | 6.35mm |
| Upper-edge to flange-edge reference | 3.45mm | Not separately labelled |
| Body depth and height | 19.20mm × 15.10mm | |
N is the selected pole size, from 2 to 24. The frame's dimensions are independent of the conducting plug body dimensions above.
| Frame dimension | Value |
|---|---|
| Overall length | [5.08N+24.04]mm |
| Inner shoulder span | [5.08N+11.04]mm |
| Central opening span | [5.08N+2.24]mm |
| Fixing-hole centre span | [5.08N+16.94]mm |
| Frame face width | 16.80mm |
| Overall depth | 19.00mm |
| Face thickness | 3.00mm |
Individual dimension tolerances take precedence over these general values.
| Dimension range | Total pitch tolerance | Nominal dimension tolerance |
|---|---|---|
| Over 0mm to 30mm | ±0.18mm | ±0.20mm |
| Over 30mm to 53mm | ±0.20mm | ±0.25mm |
| Over 53mm to 70mm | ±0.25mm | ±0.30mm |
| Over 70mm to 90mm | ±0.30mm | ±0.35mm |
| Over 90mm to 115mm | ±0.35mm | ±0.44mm |
| Over 115mm to 150mm | ±0.44mm | ±0.55mm |
| Over 150mm to 200mm | ±0.55mm | ±0.70mm |
| Over 200mm to 250mm | ±0.70mm | ±0.80mm |
| Over 250mm to 320mm | ±0.75mm | ±0.90mm |
| Geometric characteristic | Applicable dimension | Tolerance |
|---|---|---|
| Perpendicularity | 0–10mm | 0.2mm |
| Over 10mm | 0.3mm | |
| Symmetry | All | 0.3mm |
| Straightness | Over 0mm to 100mm | 0.2mm |
| Parallelism | Over 100mm to 150mm | 0.3mm |
| Over 150mm | 0.5mm |
