SVC-C is an LCD display AC voltage stabilizer with CPU control, adjustable stabilization accuracy and configurable delay time. The series provides time-delay, over-voltage, under-voltage, overload, over-temperature and mechanical fault protection, with an LCD interface that shows real-time operating status and alarm indications.
Performance
- Input voltage: single phase 90V-240V, 120V-260V, 130V-260V or 150V-260V; three phase 277V-430V or 240V-430V.
- Output voltage: single phase 0.5KVA-3KVA models support 220V and 110V, while 5KVA-30KVA models support 220V; three phase output supports 220V phase voltage and 380V line voltage.
- Voltage accuracy: at 110V: +/-2%, +/-6% or +/-10%; at 220V: +/-1%, +/-3% or +/-5%; at 380V: +/-3%.
- Frequency: 50/60Hz.
- Delay time: long delay 180s, short delay 5s.
- Over-voltage protection: 250V with 5s delay, 275V with 2s delay, 295V with 1s delay, or 305V with 0s delay.
- Under-voltage protection: 180V with 5s delay.
- Overload protection: 2.8 times rated power.
- Over-temperature protection: 90°C.
- Load power factor: 0.8.
- Adjusting time: less than 1s when input voltage changes by 10%.
- Waveform distortion: no additional waveform distortion.
- Dielectric strength: 1500V/1 min.
- Insulation resistance: >=2MΩ.
- Working environment: -5°C to +40°C, humidity below 90%.
