Select a bracket by its sensor designation, mounting form and dimensioned drawing. CSD-M brackets cover the M8, M12, M18 and M30 designations in flat and L-shaped forms. CSD-F brackets cover square sensor formats, while CSD-G brackets are identified for CGF50 and CGF70. Reflectors and M12 connector accessories are listed separately.
| Bracket model | Sensor designation | Form | Drawing dimensions |
|---|---|---|---|
| CSD-M8 | M8 | Flat | 58mm length; 10mm width; oblong opening references 7mm and 12mm |
| CSD-M8-L | L-shaped | 30mm upright; 28mm base reference; 10mm width; opening references 7mm and 12mm | |
| CSD-M12 | M12 | Flat | 72.4mm length; 19.5mm width; opening references 11.9mm and 22mm |
| CSD-M12-L | L-shaped | 36mm upright; 34mm base reference; 19mm width; opening references 7mm and 22mm | |
| CSD-M18 | M18 | Flat | 86.1mm length; 26mm width; opening references 17.9mm and 28mm |
| CSD-M18-L | L-shaped | 46mm upright; 43.85mm base reference; 26mm width; opening references 18.1mm and 27.88mm | |
| CSD-M30 | M30 | Flat | 108mm length; 42.05mm width; opening references 30.45mm and 40mm |
| CSD-M30-L | L-shaped | 62.95mm upright; 49mm base reference; 42.05mm width; opening references 30.5mm and 40.4mm |
The sensor designation identifies the bracket selection group; it is not the opening dimension. Check the full drawing and actual sensor mounting interface before specifying hole clearance or preparing a mounting surface.
| Bracket model | Designation | Dimension references |
|---|---|---|
| CSD-F18 | 18×18 sensor mounting bracket | 18.15mm top reference; 8.52mm and 8.45mm upright references; 23.11mm length reference; slot details 3.7mm, 3.5mm and 3.8mm |
| CSD-F25 | 25×25 sensor mounting bracket | 25.05mm top reference; 9.28mm and 11.41mm upright references; 30.39mm length reference; slot details 4.30mm, 7.80mm and 3.20mm |
| CSD-F30 | 30×30 sensor mounting bracket | 30mm top reference; 14.18mm and 14.40mm upright references; 35.27mm length reference; slot details 4.82mm, 11.58mm and 4.5mm |
| CSD-F40 | 40×40 sensor mounting bracket | 40mm top reference; 24.36mm and 14.12mm upright references; 38.10mm length reference; slot details 6.27mm, 16.55mm and 5.44mm |
| CSD-G50 | CGF50 mounting bracket | 58.2mm width reference; 19.4mm upright reference; additional drawing callouts 11.50mm, 6.05mm, Ø5.9mm and 12.75mm |
| CSD-G70 | CGF70 mounting bracket | 54.6mm width reference; 20mm upright reference; 28mm base reference; additional callouts 12.41mm, 6.3mm and Ø5mm |
Use the dimensioned views in the attachment to identify each feature, slot and measurement direction. Bracket material, thickness and fastening torque are not specified in this selection sheet.
| Designation | Accessory | Selection information |
|---|---|---|
| TD08 | Standard reflector | For a compatible reflective sensing arrangement; verify reflector size and the sensor's optical requirements. |
| TD02 | ||
| M12 | Straight connector plug | Cable-to-connector assembly; match the thread, coding, pin count and pin assignment to the sensor. |
| M12-L | Angled connector plug |
