PX Male-Thread Y Push-In Pneumatic Fittings

Series Part Number

Part Number: PX 8 - 02
Explanation:

Series

PX - Male-thread Y fitting; unsuffixed black-body model range

Tube Outside Diameter

4 - 4mm; thread M5, 01 or 02
6 - 6mm; thread M5, 01, 02, 03 or 04
8 - 8mm; thread 01, 02, 03 or 04
10 - 10mm; thread 01, 02, 03 or 04
12 - 12mm; thread 01, 02, 03 or 04

Male Thread Size

M5 - M5 metric thread
01 - 1/8in nominal thread
02 - 1/4in nominal thread
03 - 3/8in nominal thread
04 - 1/2in nominal thread

Description

PX male-thread Y fittings

PX fittings divide a threaded pneumatic connection into two parallel push-in tube connections. White and black-body versions have separate release collars for the two tubes and a hexagonal section at the male thread. Select the tube diameter, thread and body version together.

Black-body model combinations

The first number after PX identifies metric tube outside diameter. Thread suffixes 01, 02, 03 and 04 indicate nominal 1/8in, 1/4in, 3/8in and 1/2in sizes respectively; M5 identifies a metric thread. Confirm the thread standard and sealing arrangement for the mating port.

Tube ODM51/8in1/4in3/8in1/2in
4mmPX4-M5PX4-01PX4-02——
6mmPX6-M5PX6-01PX6-02PX6-03PX6-04
8mm—PX8-01PX8-02PX8-03PX8-04
10mmPX10-01PX10-02PX10-03PX10-04
12mmPX12-01PX12-02PX12-03PX12-04

Inch tubing is a separate selection. The connection chart shows the following tube/thread combinations; metric and inch tubes are not interchangeable.

Inch tube ODAvailable nominal thread sizes
5/32inM5, 1/8in, 1/4in
1/4inM5, 1/8in, 1/4in, 3/8in, 1/2in
5/16in1/8in, 1/4in, 3/8in, 1/2in
3/8in
1/2in
PX Y fitting model combinations and outline in the upper-left panel
The upper-left PX panel shows the threaded Y fitting, outline and tube/thread combinations; adjacent panels show other connection types.

Black-body connection details

The illustrated black-body fitting has stainless-steel tube-retaining springs and individual blue release buttons. The threaded end includes a hexagonal installation surface.

Black PX fitting and close-up of its stainless-steel tube-retaining spring
Retaining-spring detail of the black-body PX fitting.
Black PX Y fitting showing two blue release buttons and male thread
Black-body PX tube entries and threaded connection.

White-version construction

The white fitting incorporates stainless-steel circlips, sealing rings and nickel-plated ferrules. The illustrated male thread is supplied with applied sealant. Specify the required tube size and thread combination for this version separately.

White PX Y fitting with circlip, ferrule and pre-applied thread sealant details
White PX retaining components and sealed threaded end.

DN model designations

GroupModels
PX4PX4-M5DN, PX4-01DN, PX4-02DN
PX6PX6-M5DN, PX6-01DN, PX6-02DN, PX6-03DN, PX6-04DN
PX8PX8-01DN, PX8-02DN, PX8-03DN, PX8-041DN
PX10PX10-01DN, PX10-02DN, PX10-03DN, PX10-04DN
PX12PX12-02DN, PX12-03DN, PX12-04DN
PX16PX16-03DN, PX16-04DN
PX threaded Y fitting and twenty-one DN model designations
DN-series PX fitting with its listed ordering codes.