ULO-TB174-PPH2.5 is a push-in wiring plug for pluggable terminal assemblies. It has one conductor connection and a 5.2mm-wide body. Select the mating terminal by its interface drawing; the plug dimensions alone do not establish compatibility with a particular terminal model.
Property
Specification
Model
ULO-TB174-PPH2.5
Connection method
Push-in
Levels / conductor connections
1 / 1
Width × length × height
5.2×15.8×40.2mm
Protection
IP20
Operating temperature
−40–105°C
Insulation
PA66, material group I, UL94V-0
Contact
Tin-plated copper alloy
Electrical and wiring data
IEC characteristic
Specification
Rated current / voltage
24A / 500V
Overvoltage category / pollution degree
III / 3
Rated impulse voltage
6kV
Category III / pollution degree 2
Voltage and impulse ratings not specified
Category II / pollution degree 2
Voltage and impulse ratings not specified
Solid conductor
0.14–4mm²
Flexible conductor
0.14–2.5mm²
Flexible conductor with ferrule
0.14–2.5mm²
Stripping length
8–10mm
Locking screw / tightening torque
Not applicable to the push-in conductor connection
UL use group
Rated current
Rated voltage
Wire range
B
20A
300V
26–12AWG
C
D
5A
600V
Outline and assembly references
The outline shows the 40.2mm overall height, 15.8mm length and 5.2mm width. The upper body reference dimension is 24.58mm.
PPH2.5 plug outline and conductor-entry view; dimensions in mm.
Assembly accessory
Reference
Marker strip
ZBF5
End clamp
E/UK
DIN rail
U35/7.5
End cover, partition plate and pluggable bridge
Not specified
The rail and end-clamp references concern the terminal assembly; the plug connects through its mating interface.
