PL420 PLCC Sockets

Series Part Number

Part Number: ULO - PL420 - 20 S S K T1 1 A
Explanation:

Prefix

Series

PL420 - This ordering sequence applies to SMT sockets; through-hole ordering fields are unspecified

Contacts

20 - Twenty contacts
28 - Twenty-eight contacts
32 - Thirty-two contacts
44 - Forty-four contacts
52 - Fifty-two contacts
68 - Sixty-eight contacts
84 - Eighty-four contacts

Housing

S - PPS

Mounting

S - SMT

Colour

K - Black
N - Brown

Plating

T1 - Tin

Height H

1 - 3.81mm
S - 4.3mm
L - 4.6mm

Packaging

A - Tube
R - Tape on reel

Description

PLCC socket construction

PL420 sockets have 1.27mm package-contact pitch and are available in through-hole and SMT constructions. The 20, 28, 44, 52, 68 and 84-contact bodies are square; the 32-contact version has a rectangular outline. Match the package contact count and the PCB termination before selecting the profile.

ConstructionContact countsHeight and terminal detailsPCB connection
Through-hole20, 28, 32, 44, 52, 68, 848.15mm body height; 3.20mm projecting leadsØ0.80mm holes on the illustrated 2.54mm grid
SMTProfile H: 3.81mm, 4.3mm or 4.6mmModel-specific surface-mount pad pattern

The 1.27mm mating-contact pitch is distinct from the through-hole PCB grid. SMT profiles do not apply to the taller through-hole housing.

Common electrical and material data

CharacteristicSpecification
Insulation resistance≥1000MΩ
Contact impedance≤20mΩ
Withstand test500VAC for 1 minute
Operating temperature0°C to +85°C
Storage temperature-20°C to +70°C
Housing familyThermoplastic; PPS specified in the SMT ordering options
Insulating material groupI
Flammability classificationUL94V-0
Contact materialCopper alloy
Rated operating voltage and currentUnspecified

The one-minute withstand test does not define a continuous operating-voltage rating.

SMT ordering options

FieldCode and meaning
Contact count20, 28, 32, 44, 52, 68, 84
Housing materialS: PPS
Mounting typeS: SMT
Housing colourK: black; N: brown
Contact platingT1: tin
Profile H1: 3.81mm; S: 4.3mm; L: 4.6mm
PackagingA: tube; R: tape on reel

The ordering sequence defines SMT versions. A through-hole ordering suffix, resin grade, finish and packaging selection are not separately specified.

Through-hole square-body dimensions

These A/B/C/D/E references belong to the upper through-hole drawing. A is the end-contact span along a side, B is overall body width, C is the lead-row span, D is the diagonal dimension and E is the inner reference width. Values are in millimetres.

ContactsA ±0.2mmB ±0.4mmC ±0.2mmD ±0.2mmE ±0.2mm
205.0815.5610.1618.469.16
287.6218.1012.7022.0511.70
4412.7023.1817.7829.2416.78
5215.2425.7220.3232.8319.32
6820.3230.8025.4040.0224.40
8425.4035.8830.4847.2029.48

32-contact through-hole rectangular body

The separate rectangular outline has unequal side dimensions. Its PCB layout is shown separately from the square-body pattern.

FeatureDimensions
Outer body sides18.10mm × 20.64mm
Inner reference sides11.70mm × 14.24mm
End-contact spans7.62mm and 10.16mm
Lead-row spans12.70mm and 15.24mm
Diagonal23.91mm
Body height8.15mm
Projecting leads3.20mm

SMT body dimensions

The lower drawing uses a different reference scheme: A and B are the outer body sides, C and D are the end-contact spans, and E is the diagonal. Values are in millimetres.

ContactsA ±0.2mmB ±0.4mmC ±0.2mmD ±0.2mmE ±0.2mm
2015.2415.245.085.0816.70
2817.7817.787.627.6220.30
3220.3210.1622.50
4422.8622.8612.7012.7027.50
5225.4025.4015.2415.2431.10
6830.8230.8220.3220.3238.30
8435.9035.9025.4025.4045.50

PCB layout and orientation

The combined drawing retains the through-hole square pattern, the 32-contact rectangular pattern and the SMT pad pattern. Through-hole holes are Ø0.80mm with a 2.54mm grid; the SMT pattern uses the 1.27mm contact pitch. Recommended layout tolerance is ±0.05mm. Use the correct construction's reference dimensions and orientation marks.

PL420 through-hole square and rectangular outlines plus SMT dimensions and PCB patterns
PL420 combined drawing: through-hole square bodies at the top, 32-contact through-hole body in the middle and SMT body and pad layout below.