| Part Number: | ULO | - | PH419ZB | - | 2 | * | 2 | P | 8 | B | S | 1 | S | T | S |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Explanation: |
Code Prefix |
Model PH419Q, PH419S - Single-row models |
Rows 1 - PH419Q or S |
Contacts per Row 1–40 - PH419Q or S |
Connector Type P - Plug |
Contact Finish 8 - Full gold flash |
Color B - Black |
Mounting V - Vertical; PH419Q, T or Y |
Dimension Type 1 - PH419Q A/B=3.00/3.00mm; S A/B/C=3.00/2.50/5.50mm; T A/B=1.90/1.90mm; V or Z A/B/C=3.00/2.60/6.50mm; W A/B/C=2.00/0.80/5.10mm; X A/B/C=2.00/1.90/5.10mm; Y A/B=2.00/2.00mm; ZB A/B/C/D=1.65/5.10/5.20/0.80mm |
Pickup Support S - PH419ZB with pickup support |
Packing T - PH419ZB tray |
Locating Posts S - PH419ZB with posts |
PH419Q, R, S, T, U, V, W, X, Y, Z, ZA and ZB share a 1.0mm contact pitch but use different row arrangements, insulating bodies and mounting patterns. Select the complete suffix and its dimensional drawing. Single-row spacers, dual-row spacers and surface-mount versions are not interchangeable solely because they share a pitch.
| Property | Value |
|---|---|
| Rated current | 1A |
| Insulation resistance | ≥500MΩ |
| Contact resistance | ≤20mΩ |
| Dielectric withstand | 600VAC for 1 minute |
| Operating temperature | -45°C to +110°C |
| Insulator | PA46; PH419Y specifies glass-filled PA46 |
| Material group / flammability | I / UL94V-0 |
| Contact material | Copper alloy |
Continuous working voltage, storage temperature, mating-cycle life and certification numbers are unspecified. The withstand value is a dielectric test condition, not a working-voltage rating.
| Model | Arrangement | Contact-count order range | Populated type 1 dimensions, mm |
|---|---|---|---|
| PH419Q | Single row, vertical through-hole | 1×1–1×40 | A/B=3.00/3.00 |
| PH419R | Single row, vertical through-hole, two insulating bars | Unestablished | A/B/C=3.00/2.55/3.00 |
| PH419S | Single row, right-angle through-hole | 1×1–1×40 | A/B/C=3.00/2.50/5.50 |
| PH419T | Dual row, vertical through-hole | 2×2–2×40 | A/B=1.90/1.90 |
| PH419U | Dual row, vertical through-hole, two insulating bars | Unestablished | A/B/C=1.90/2.55/1.90 |
| PH419V | Dual row, right-angle through-hole | 2×2–2×40 | A/B/C=3.00/2.60/6.50 |
| PH419W | Dual row, upright SMT | A/B/C=2.00/0.80/5.10 | |
| PH419X | Dual row, upright SMT with locating posts | A/B/C=2.00/1.90/5.10 | |
| PH419Y | Dual row, vertical through-hole, wide body | A/B=2.00/2.00 | |
| PH419Z | Dual row, right-angle through-hole, wide body | A/B/C=3.00/2.60/6.50 | |
| PH419ZA | Dual row, upright SMT, tall body with posts | Unspecified | A/B/C=2.50/2.70/3.80 |
| PH419ZB | Dual row, upright SMT, two-bar spacer body | 2×2–2×40 | A/B/C/D=1.65/5.10/5.20/0.80 |
Dimension letters identify different projections, heights or spans in each model's drawing and must not be compared without that drawing. Blank type rows do not establish additional sizes. PH419R's associated order image is labeled PH419X and describes dual-row SMT; PH419U's associated image is labeled PH419V and describes right-angle mounting. Neither diagram establishes ordering codes for the different spacer model.
| Models | Defined codes |
|---|---|
| PH419Q, T, Y | P plug; 8 full gold flash; B black; V vertical; dimension type 1 |
| PH419S, V, Z | P plug; 8 full gold flash; B black; R right angle; dimension type 1 |
| PH419W, X | P plug; 8 full gold flash; B black; S SMT; dimension type 1 |
| PH419ZB | P plug; 8 full gold flash; B black; S SMT; type 1; pickup S with/X without; post S with/X without; packing T tray/R tape and reel/B tube |
| PH419R, U | Exact ordering syntax, finish code and option availability unestablished |
| PH419ZA | No ordering-code diagram; finish, packing and option codes unspecified |
These outlines show 0.30mm square pins at 1.00±0.1mm pitch, 1.27mm body width and 1.00mm insulating-bar thickness. Length is N×1.0mm and end-contact span is (N−1)×1.0mm, with N contacts in the single row. Recommended PCB holes are Ø0.50mm. PH419R adds a second insulating bar and a 2.55mm B reference; it is not the dual-row SMT version depicted in its associated ordering image.
| Models | Body width | Body or bar thickness | Length reference |
|---|---|---|---|
| PH419T | 2.30mm | 1.00mm | N×1.0mm |
| PH419U | Two 1.00mm bars | ||
| PH419V | 1.20mm | ||
| PH419Y, Z | 3.10mm | 1.50mm | N×1.0+0.2mm |
N means contacts per row. Each outline uses 0.30mm square pins, 1.00mm row and contact spacing, (N−1)×1.0mm end-contact span and Ø0.50mm holes. The PH419V and PH419Z bends include a 1.00mm row-height reference. PH419U is the two-bar vertical configuration; the retained PH419V order image does not change its structure.
| Model | Body references | PCB pad and post references |
|---|---|---|
| PH419W | 3.10mm width, 1.00mm body thickness | 0.50mm pad width, 6.0±0.5mm outside reference and 1.50mm inner gap; no post shown |
| PH419X | 3.10mm width, 1.50mm body thickness | Same 0.50mm pad width and 6.0±0.5mm outside reference; Ø0.64mm posts, Ø0.90mm holes at (N−2)×1.0mm spacing |
| PH419ZA | 2.30mm width, 2.00mm body thickness, 2.40mm underside reference | 0.50mm pad width, 6.0±0.5mm outside reference and 1.50mm inner gap; post shown but diameter unspecified |
| PH419ZB | 3.10mm width; two 1.00mm insulating bars | 0.50mm pad width, 6.0±0.5mm outside reference and 1.50mm inner gap; optional post diameter unspecified |
The SMT contact grid remains 1.00mm. Use the particular drawing's A/B/C/D references for contact height and foot span; a locating post in a product illustration does not establish a hole size where none is dimensioned.
