| Part Number: | ULO | - | PH417C | - | 1 | * | 2 | P | 8 | B | S | 1 | 1 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Explanation: |
Code Prefix |
Model PH417A, PH417B, PH417C - Single-row spacer headers |
Rows 1 - PH417A, B, C, G or I |
Contacts per Row 1–40 - 1–40 contacts per row |
Connector Type P - Plug |
Contact Finish 8 - Full gold flash |
Color B - Black |
Mounting V - Vertical; PH417A, D or I |
Arrangement or Dimension A - V1 contact arrangement; PH417A or D |
Dimension or Foot Pattern 1 - PH417A or D dimension Type 1; PH417C R1 foot pattern |
PH417A through PH417I use 2.54mm contact pitch with different insulating-bar positions, contact projections and bends. Choose a complete model and dimension type for the required board arrangement. A spacer dimension alone does not establish the final mated board separation.
| Property | Value and applicability |
|---|---|
| Rated current | 1.5A, all models |
| Insulation resistance | ≥500MΩ, all models |
| Contact resistance | ≤50mΩ, all models |
| Dielectric withstand | 600VAC for 1 minute, all models |
| Operating temperature | -45°C to +110°C except PH417D |
| PH417D operating temperature | Unestablished: -45°C to +110°C and -20°C to +70°C listed |
| PH417A, B, C, E, F, G insulator | PA46 |
| PH417D insulator | Unestablished: glass-filled PBT and PA46 listed |
| PH417H and PH417I insulator | Unestablished: PBT and PA46 listed |
| Flammability | UL94V-0, all models |
| Material group | I except PH417E, which is unspecified |
| Contact material | Copper alloy except PH417E, which is unspecified |
Continuous working voltage, storage temperature, mating-cycle life and certification numbers are unspecified. A dielectric test value does not define a continuous voltage rating. The unresolved polymer and temperature entries must not be treated as interchangeable certified options.
| Model | Rows / contact count | Mounting and body arrangement | Dimension selection |
|---|---|---|---|
| PH417A | Single, 1×1–1×40 | Vertical, two insulating bars; V1 or V2 contact arrangement | A/B/C type code; order illustration references types through 42 |
| PH417B | Right angle with spaced insulating bars | A/B/H1/H2 types 1 and 2 | |
| PH417C | SMT with two bars; R1 or R2 foot arrangement | ||
| PH417D | Dual, 2×1–2×40 | Vertical with two bars; V1 or V2 arrangement | A/B/H type code; order illustration references types through 46 |
| PH417E | Right angle with spaced bars | A/B/H1/H2 type 1 | |
| PH417F | Upright SMT with two bars | A/B/H1/H2 types 1–3 | |
| PH417G | Single, 1×1–1×40 | Right angle; insulating bars on perpendicular contact sections | A/B/C type 1 |
| PH417H | Dual, 2×1–2×40 | ||
| PH417I | Single, 1×1–1×40 | Vertical long-pin configuration | 15.50mm projections at each end; 10.00mm central body dimension |
All ordering illustrations list P plug, finish 8 full gold flash and B black housing. Mounting codes are V vertical, R right angle and S SMT where applicable. PH417A and PH417D use A for V1 or B for V2 in their separate arrangement-code position. PH417C uses 1 for R1 or 2 for R2. The position of a code matters: B is not a universal dimension or configuration code.
The drawings use 0.64×0.64mm pins with ±0.05mm tolerance, overall body length 2.54N±0.3mm and end-contact span 2.54(N−1)±0.2mm. N is the number of contacts per row. Recommended PCB holes are Ø1.02mm; the dual-row layout uses 2.54mm row spacing. The numerous small dimension-type entries remain in the illustrations; entries that cannot be read reliably do not establish a selectable spacer height or pin projection. Match the type to a legible dimensional specification before assigning an exact board separation.
| Model / type | A, mm | B, mm | H1, mm | H2, mm | Pin length, mm |
|---|---|---|---|---|---|
| PH417B / 1 | 3.50 | 3.00 | 16.33 | 1.50 | 25.10 |
| PH417B / 2 | 6.33 | 15.10 | |||
| PH417C / 1 | 3.00 | 4.70 | 6.50 | 3.48 | 12.90 |
| PH417C / 2 | 4.83 | 3.50 | 12.10 | ||
| PH417E / 1 | 8.60 | 5.50 | 11.37 | 5.25 | 31.50 / 26.40 |
| PH417F / 1 | 6.00 | 7.40 | 6.50 | 3.36 | 15.30 |
| PH417F / 2 | 15.00 | 23.80 | |||
| PH417F / 3 | 5.80 | 6.50 | 3.81 | 15.60 |
Dimension symbols refer to the individual drawings. PH417B uses Ø1.02mm through-holes. PH417C has alternating R1/R2 SMT patterns with 1.27×2.00mm pads, 5.08mm repeat references and 3.46mm row reference. PH417E uses a 2.54mm square grid of Ø1.02mm holes. PH417F has 1.27×3.56mm pads with 9.20mm outside row reference. Their body-length references are 2.54N±0.3mm and contact span 2.54(N−1)±0.2mm.
| Model | Populated dimensions | Board and body references |
|---|---|---|
| PH417G | Type 1: A/B/C=6.00/3.00/6.00mm; pin length 26.00mm | Single row, 2.54mm pitch, Ø1.02mm holes, 2.50mm insulating-bar width |
| PH417H | Type 1: A/B/C=6.00/3.00/6.00mm; pin lengths 26.00/31.10mm | Dual rows at 2.54mm; Ø1.02mm holes; 5.00mm bar width |
| PH417I | 15.50mm exposed contact at each end; 10.00mm central body | 2.50mm body width; Ø1.02mm holes; 2.54N±0.3mm body length and 2.54(N−1)±0.2mm contact span |
PH417G and PH417H use 0.64mm square contacts and nominal 2.54N body length with 2.54(N−1) end-contact span. The perpendicular insulating-bar arrangements differ from the parallel bars of PH417B and PH417E.
