PH409 and PH410 2.54mm Straight and SMT Pin Headers

Series Part Number

Part Number:	ULO	-	PH410F	-	2	*	2	S	8	1	S	T
Explanation:	Code Prefix		Model PH409A, PH409C - Vertical headers covered here PH410A, PH410B, PH410D, PH410F, PH410G, PH410J - SMT headers covered here PH410C, PH410E, PH410I - Right-angle headers covered here PH410H - Vertical header covered here; use only the dimension types defined below		Rows 1 - PH409A or PH410H with 1–40 contacts; PH410B/G with 2–40; PH410E with 3 2 - PH409A/C or PH410A/C/D/F/H/I/J with 2–40 contacts per row		Contacts per Row 1–40 - Single-row PH409A or PH410H 2–40 - Two-row configurations listed in Rows, or single-row PH410B/G 3 - Fixed single-row PH410E	Mounting or Color V - Vertical; PH409A, PH409C or PH410H S - SMT; PH410A, B, D, F, G or J R - Right angle; PH410C or I B - Black housing; PH410E, whose mounting is fixed right angle	Contact Finish 8 - Full gold flash; all covered models except PH409C 6 - Tin; all covered models except PH409C 0 - Selective gold flash; PH409C only 1 - Selective 10µin gold; PH409C only 3 - Selective 30µin gold; PH409C only	Dimension Type 1 - PH409C A/B=3.00/6.10mm; PH409A A/B=3.00/6.00mm; PH410A A=7.10mm; B A=3.20mm; C A/B=6.00/3.00mm; D A/B=6.20/9.80mm; E A/B/C=13.20/8.20/1.80mm; F B/C=6.00/7.50mm; G A=3.20mm; H A/B=7.00/3.60mm; I A/B=7.00/3.80mm; J A=5.84mm 2 - PH409C A/B=3.30/11.90mm, or PH410G A=6.00mm; no other dimension-type codes are included in this breakdown	Pickup Support S - PH410F with pickup support X - PH410F without pickup support Blank - All other covered models: omit this field	Packing T - PH410F tray R - PH410F tape-and-reel B - PH410F tube A - PH410F polybag Blank - All other covered models: omit this field

Description

2.54mm pin-header configurations

PH409 and PH410 headers provide male contacts in straight, right-angle and surface-mount arrangements. Select the full model suffix, row count and dimension type before assigning a PCB footprint. A shared 2.54mm contact pitch does not establish equal body height, solder-tail length or mounting geometry.

Electrical and material selection

Model	Current	Dielectric withstand	Operating temperature	Insulator
PH409C	Unspecified	Unestablished: 500VAC for 1 minute and 600VAC are listed with inconsistent field labels	0°C to +85°C	Glass-filled thermoplastic
PH409A		500VAC RMS for 1 minute	-45°C to +110°C	PBT with 30% glass fiber
PH409		500VAC for 1 minute	0°C to +85°C	Glass-filled PBT
PH410	3A	600VAC for 1 minute	Unestablished: -40°C to +105°C and -45°C to +110°C listed	PBT or PA46
PH410A, PH410B, PH410C	1.5A	500VAC for 1 minute	-45°C to +110°C	Thermoplastic
PH410D, PH410G	1.5A		Unestablished: -45°C to +110°C and -20°C to +80°C listed	Thermoplastic
PH410E	Unestablished: 3A and 1.5A listed			PA46 listed; exact grade unspecified
PH410F	1.5A listed			Glass-filled PA46
PH410H	1.5A listed			PBT with 30% glass fiber
PH410I	1.5A		-45°C to +110°C	PBT with 30% glass fiber
PH410J	1.5A		-45°C to +110°C	Thermoplastic

All entries specify copper-alloy contacts, material group I and contact resistance no greater than 20mΩ. Insulation resistance is at least 1000MΩ except PH409C, for which no valid resistance value is established. UL94V-0 is listed except for PH409A, whose flammability grade is unspecified. Storage ranges are -20°C to +75°C for PH409C, -20°C to +70°C for PH409 and -45°C to +105°C for PH410; other storage ranges are unspecified. Working voltage, UL use-group ratings and certification numbers are not established. Dielectric test voltages are not continuous working-voltage ratings.

Rows, mounting and ordering choices

Model	Contact arrangement	Mounting / finish codes	Dimension and option notes
PH409C	Order lists 2×2–2×40; outline also shows a single-row version	V vertical; selective gold 0 flash, 1 10μin, 3 30μin	Type 1: A/B=3.00/6.10mm; type 2=3.30/11.90mm; single-row order applicability unestablished
PH409A	1×1–1×40 or 2×2–2×40; illustrated single-row geometry	V vertical; 8 full gold flash, 6 tin	Type 1: A/B=3.00/6.00mm; body height 4.30mm; mating projection 5.80mm shown
PH409	1×1–1×40, 2×2–2×40, 3×3–3×40	S straight; F1 full gold flash, 6 tin	Dimension types are specific to single, dual or three rows
PH410	Single row 1×1–1×40; dual 2×2–2×40; three rows 3×3–3×40 in right-angle drawing	U/D single-row bends; R right angle; F1 full gold flash, 6 full tin	U, D, right-angle and additional mounting patterns have separate dimension tables; match the exact diagram
PH410A	2×2–2×40	S SMT; 8 full gold flash, 6 full tin	Type 1: A=7.10mm
PH410B	1×2–1×40	S SMT; 8 full gold flash, 6 full tin	Type 1: A=3.20mm
PH410C	2×2–2×40	R right angle; 8 full gold flash, 6 full tin	Type 1: A/B=6.00/3.00mm; pin lengths 14.25/19.30mm
PH410D	2×2–2×40	S SMT; 8 full gold flash, 6 full tin	Type 1: A/B=6.20/9.80mm; pin length 15.60mm
PH410E	1×3	Right angle; B black; 8 full gold flash, 6 full tin	Type 1: A/B/C=13.20/8.20/1.80mm; use the illustrated staggered footprint
PH410F	2×2–2×40	S SMT; 8 full gold flash, 6 full tin	Type 1 B/C=6.00/7.50mm; pickup S with, X without; T tray, R tape and reel, B tube, A polybag
PH410G	1×2–1×40	S SMT; 8 full gold flash, 6 full tin	A=3.20mm type 1 or 6.00mm type 2
PH410H	1×1–1×40 or 2×2–2×40; dual-row outline shown	V vertical; 8 full gold flash, 6 full tin	Type 1: A/B=7.00/3.60mm
PH410I	2×2–2×40	R right angle; 8 full gold flash, 6 full tin	Type 1: A/B=7.00/3.80mm; type 2=6.00/3.00mm
PH410J	2×2–2×40	S SMT; 8 full gold flash, 6 full tin	Type 1: A=5.84mm; locating pegs shown

Row × contacts-per-row notation is retained. Blank dimension-type slots are not defined options. Do not combine a dimension code or finish code from one model with another model's ordering pattern.

PH409C and PH409A vertical headers

PH409C uses 0.64mm square pins with a 2.54mm body height in the illustrated single and dual rows; the dual-row body width is 5.00mm. PH409A has 0.64×0.64mm contacts with ±0.05mm tolerance, overall length 2.54N±0.38mm and end-contact span 2.54(N−1)±0.2mm, where N is contacts per illustrated row.

PH409C dimensions — PH409C single and dual-row outlines; ordering support for the single-row outline is unestablished.

PH409A dimensions — PH409A single-row vertical outline with A and B contact projections.

PH409 straight-header dimension types

The straight-header drawings use 0.64mm square pins and a 2.5mm body height. Body length is 2.54N±0.5mm and end-contact span is 2.54(N−1)±0.3mm. N is contacts per row. Dual-row width is 5.00mm; the three-row drawing gives 7.62mm overall width.

Single-row type	A/B, mm	Single-row type	A/B, mm
1	3.00/6.10	26	3.00/15.50
2	0.00/9.15	27	3.00/17.50
3	0.00/12.50	28	3.00/20.50
4	0.00/21.50	29	3.00/8.90
5	3.00/12.50	30	3.20/19.40
6	3.00/3.00	31	5.00/12.50
7	3.00/17.30	32	3.00/9.50
8	2.50/5.80	33	3.00/19.50
9	3.00/7.10	34	3.00/29.50
10	3.00/8.30	35	3.00/6.96
11	3.00/9.30	36	3.00/5.96
12	3.00/12.30	37	3.00/5.50
13	0.40/7.30	38	3.00/14.30
14	3.00/14.50	39	3.00/15.90
15	3.00/5.30	40	3.00/21.50
16	3.00/3.50	41	3.34/13.96
17	0.00/9.00	42	3.50/22.00
18	6.00/11.50	43	3.00/24.50
19	3.00/18.80	44	3.00/34.50
20	3.00/10.50	45	3.00/18.50
21	6.25/6.25	46	3.00/8.00
22	3.00/12.10	47	6.00/6.00
23	3.00/11.50	48	3.00/7.50
24	3.00/13.50	49	3.00/5.00
25	3.00/8.50	50	3.00/9.00

Dual-row type	C/D, mm	Dual-row type	C/D, mm
1	3.00/6.10	18	3.00/19.50
2	3.00/7.50	19	6.00/15.40
3	3.00/10.50	20	3.00/5.96
4	0.00/13.50	21	3.00/6.96
5	2.50/5.80	22	3.00/15.90
6	3.00/7.10	23	3.00/24.50
7	3.00/8.30	24	3.00/29.50
8	3.00/9.30	25	3.00/34.50
9	3.00/12.30	26	3.00/8.50
10	3.00/14.50	27	3.00/18.50
11	3.00/5.30	28	3.00/12.50
12	3.00/14.30	29	4.00/10.50
13	3.00/11.50	30	3.00/16.50
14	3.00/13.50	31	3.00/21.50
15	2.50/16.00	32	3.24/8.16
16	3.00/3.00	33	2.20/6.10
17	3.00/9.50	34	3.50/11.00

For the three-row PH409, the populated type 1 entry is E/F=3.00/6.10mm. Other blank types have no assigned dimensions.

PH409 straight dimensions — PH409 straight-header dimension types and row arrangements.

PH410 bend and mounting patterns

PH410 includes U and D single-row bends and multi-row right-angle layouts. The small dimension tables in the illustration must be matched to the chosen bend; entries that cannot be read reliably do not establish a machined dimension. The dual-row right-angle entries below are legible.

Right-angle type	A/B/C, mm	Pin lengths, mm
1	6.00/3.00/13.04	14.00 / 19.00
2	6.10/4.00/12.94	14.60 / 19.90
3	6.00/4.00/12.76	14.70 / 19.70
4	9.00/3.00/16.04	17.00 / 22.00
5	6.00/3.00/13.80	13.70 / 19.80
6	6.10/3.00/13.04	14.00 / 19.00
7	6.50/3.00/13.10	14.00 / 19.00
8	3.00/6.00/9.32	10.30 / 13.20
9	3.00/3.00/10.90	11.90 / 16.90
10	7.00/3.10/13.90	14.90 / 20.00

PH410 dimensions — PH410 U, D and right-angle outlines with separate dimension tables.

PH410A through PH410D

Model	Body / footprint references
PH410A	Body width 5.00mm, thickness 2.50mm; 0.64mm square pins; SMT pads 1.00×1.50mm, pad-row reference 5.80mm
PH410B	Body height 2.50mm, width 3.00mm; bend references 1.73/2.90/1.80mm; pads 0.75×2.54mm
PH410C	Body height 4.90mm, width 5.80mm; 2.54mm row pitch; PCB holes Ø1.02mm
PH410D	Body height 4.90mm, width 5.80mm; 0.60mm seating reference; pads 1.30×4.30mm with 10.80mm outside reference

PH410A outline — PH410A upright SMT outline and staggered pads.

PH410B outline — PH410B right-angle SMT bend and pad geometry.

PH410C outline — PH410C A/B projections, pin lengths and through-hole footprint.

PH410D outline — PH410D upright SMT pads and dimensions.

PH410E through PH410J

PH410E has a dedicated three-contact staggered layout with 10.16mm outer-contact reference and Ø1.00mm PCB holes. PH410F uses locating features and an optional pickup support; the pad pattern includes 2.00×1.00mm pads, C+0.5mm outside reference and Ø1.80mm locating holes. PH410G uses 1.27×3.00mm pads and a 2.50mm body height. PH410H has a 7.40mm body height and PH410I a 7.40mm body depth; both illustrated dual-row layouts use Ø1.02mm holes. PH410J includes 1.25mm locating pegs, staggered 1.00×1.50mm pads and a 6.80mm pad-row reference. Retain each drawing's dimension symbols when comparing variants.