| Part Number: | ULO | - | PCB464 | - | 2 | M | V | A | 6 |
|---|---|---|---|---|---|---|---|---|---|
| Explanation: |
Code Prefix |
Series |
Positions 1–6 - 1–6 positions; no leading zero |
Connector Type M - Male PCB connector; V termination |
Termination C - Crimp; female configuration |
Color A - Gray housing |
Contact Finish 6 - Full tin |
PCB464 TJCI comprises female housings, female crimp terminals and straight male PCB connectors. These are separate components rather than a supplied complete kit. Select matching position counts and the required contact finish. No compatibility with another connector brand is specified.
| Component | Configuration | Selection |
|---|---|---|
| Female housing | 1–6 positions, gray Nylon66 | Choose position count; crimp contacts are separate |
| Female terminal | Crimp contact, 15mm overall length | Choose contact finish and verify the conductor/crimp fit |
| Male PCB connector | Straight pins, 1–6 positions | Choose position count and contact finish |
| Property | Value |
|---|---|
| Rated voltage / current | 250V / 1A |
| Contact resistance | ≤30mΩ |
| Insulation resistance | ≥1000MΩ |
| Withstand test | 500VAC for 1 minute |
| Operating temperature | -25°C to +85°C |
| Storage temperature | -25°C to +85°C |
| Listed board thickness | 1.6mm |
| Insulator | Nylon66, material group I, UL94V-0 |
| Contacts | Copper alloy |
Two-position parts have a 10mm contact interval. On longer parts the first interval is 10mm and the subsequent intervals are 8mm. This is not a uniform 8mm or 10mm connector footprint. Dimensions A and B below follow the indicated drawing references.
| Positions | Female housing | Male PCB connector | ||
|---|---|---|---|---|
| A | B | A | B | |
| 1 | Not assigned | Not assigned | ||
| 2 | 10mm | 16mm | 10mm | 18mm |
| 3 | 18mm | 24mm | 18mm | 26mm |
| 4 | 26mm | 32mm | 26mm | 34mm |
| 5 | 34mm | 40mm | 34mm | 42mm |
| 6 | 42mm | 48mm | 42mm | 50mm |
| Component | Additional dimensions |
|---|---|
| Female terminal | 15mm overall, 7mm internal reference, 3mm width, 2.7mm profile |
| Single-position female housing | Ø7.5mm body, 22.2mm length |
| 2–6-position female housing | 23.2mm length; 7.5mm outer width and 5.8mm indicated inner reference |
| Single-position male connector | Ø2.36mm pin, Ø6mm base, 2mm base thickness, 3.5mm tail |
| 2–6-position male connector | Ø2.36mm pins, 5.2mm base width, 2mm base thickness, 3.78mm tails |
| Wire property | Listed value | Selection limitation |
|---|---|---|
| AWG range | 24–18AWG | These two conductor ranges do not describe equivalent upper limits. The permissible upper conductor size is not established; verify the terminal and crimp tooling against the intended wire. |
| Metric conductor area | 0.2–0.5mm² | |
| Insulation outer diameter | 1.6–2.7mm | Check insulation support separately from conductor crimp fit |
| Field after PCB464 | Code | Meaning |
|---|---|---|
| Contact count | 1–6 | Number of positions |
| Connector type | M | Male |
| F | Female | |
| Termination | C | Crimp |
| V | Straight type | |
| Housing color | A | Gray |
| Contact finish | 6 | Full tin |
| 8 | Full gold flash |
Apply the fields to the selected component. The code key does not establish that every possible field combination is available.
