| Part Number: | ULO | - | TB | - | PA14HWP | - | 12 | P | - | 1 | 000A |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Explanation: |
Brand |
Series Code |
Model PA10H - H strip, 10.0mm pitch; 2–24 poles |
Poles 02–24 - PA10H and PA10HWP |
Pole Suffix |
Colour 1 - Grey |
Customer Requirements 000A - Standard suffix shown in the six scoped drawings |
This family includes PA8H, PA10H, PA12H, PA14H, PA16H and PA18H, plus HWP variants in the PA8, PA10, PA12 and PA14 sizes. Each strip provides a single row of screw-connected positions. Keep the full model suffix when selecting a strip: electrical ratings, internal sections and dimensions are model-specific.
| Models | Pitch | Pole selection | Terminal screw | Tightening torque |
|---|---|---|---|---|
| PA8H and PA8HWP | 8mm | 2–12 | M2.5 | 0.4N·m |
| PA10H and PA10HWP | 10mm | 2–24 | M3 | 0.5N·m |
| PA12H and PA12HWP | 12mm | 2–12 | M3.5 | 0.8N·m |
| PA14H and PA14HWP | 13.5mm | 2–12; dimensioned drawings show 12 poles | M4 | 1.2N·m |
| PA16H | 14.5mm | 2–12 | M5 | 2N·m |
| PA18H | 16.5mm |
| Models | Overvoltage category | Pollution degree | Rated current | Rated voltage | Rated impulse voltage |
|---|---|---|---|---|---|
| PA8H | III | Not specified | 32A | 450V | 4kV |
| PA8HWP | 24A | ||||
| PA10H and PA10HWP | 2 | 41A | |||
| PA12H and PA12HWP | Not specified | 8kV | |||
| PA14H and PA14HWP | 2 | 57A | 750V | ||
| PA16H | 76A | ||||
| PA18H | 101A |
| Models | Use group | Rated current | Rated voltage | Wire range |
|---|---|---|---|---|
| PA8H and PA8HWP | B | 20A | 300V | 22–12AWG |
| PA10H and PA10HWP | 30A | 18–10AWG | ||
| C | Not specified | |||
| D | 10A | 300V | 18–10AWG | |
| PA12H and PA12HWP | B | 30A | 22–10AWG | |
| PA14H and PA14HWP | 50A | 20–8AWG | ||
| C and D | Not specified | |||
| PA16H | B | 65A | 300V | 14–6AWG |
| C and D | Not specified | |||
| PA18H | B | 85A | 300V | 16–4AWG |
| C and D | Not specified | |||
| Models | General conductor specification | Conductor-type information | Stripping length |
|---|---|---|---|
| PA8H | 4mm² | Rated cross section: 4mm² for solid, flexible and flexible with ferrule | Not specified |
| PA8HWP | 2.5mm² | ||
| PA10H and PA10HWP | 1–6mm² | 9mm | |
| PA12H and PA12HWP | 2.5–6mm² | Solid, flexible and flexible with ferrule: 2.5–6mm² | Not specified |
| PA14H and PA14HWP | 2.5–10mm² | Solid, flexible and flexible with ferrule: 2.5–10mm² | |
| PA16H | 6–16mm² | Solid, flexible and flexible with ferrule: 6–16mm² | |
| PA18H | Solid: 6–16mm²; flexible and ferrule-specific limits not separately specified within this range |
General conductor specifications, rated cross sections and UL wire ranges are distinct entries. For PA8HWP, the 4mm² rated cross section does not extend the separately listed 2.5mm² general conductor specification.
| Parameter | PA8H, PA8HWP, PA12H and PA12HWP | PA10H, PA10HWP, PA14H, PA14HWP, PA16H and PA18H |
|---|---|---|
| Housing | PA66 | |
| Flammability grade | UL94V-0 | UL94V-2 |
| Insulation material group | I | |
| Current-carrying component | Tin-plated copper alloy | Zinc-plated steel |
| Screw material | Not specified | Zinc-plated steel |
| RoHS compliance | Not specified | Declared |
| Connection method | Screw connection | |
| Number of rows | 1 | |
| Protection rating | IP20 | |
| Operating temperature | -40°C to +105°C | |
| Separate mounting screw and torque | Not specified | |
Specify the complete model and pole count. PA14H and PA14HWP have 12-pole dimensioned configurations; shorter pole counts must not use the 158mm overall length shown for those configurations.
| Ordering field | Selection |
|---|---|
| Pole code | PA10H and PA10HWP: 02P–24P; remaining models: 02P–12P |
| Colour code | 1: Grey; 2: Blue; 3: Black; 4: Green; 5: Orange; 6: Red; 7: Transparent; 8: Yellow; 9: White |
| Customer requirement suffix | 00A standard designation for PA10H, PA10HWP, PA14H, PA14HWP, PA16H and PA18H |
Dimensions are in millimetres. N denotes pole count; P has the same meaning in the PA8 overall-length formulas. The PA14 lengths below apply specifically to 12-pole strips.
| Model | Overall length | Depth | Overall height | Mounting hole diameter |
|---|---|---|---|---|
| PA8H | 8×(N−1)+6.00 | 16.80 | 14.30 | Not specified |
| PA8HWP | ||||
| PA10H | 10×(N−1)+6.70 | 20.50 | 16.70 | 3.50 |
| PA10HWP | ||||
| PA12H | 12×(N−1)+5.50 | 23.80 | 19.00 | Not specified |
| PA12HWP | ||||
| PA14H, 12 poles | 158.00 | 25.60 | 20.70 | 4.40 |
| PA14HWP, 12 poles | ||||
| PA16H | 14.5×(N−1)+10.50 | 28.10 | Not specified | 4.20 |
| PA18H | 16.5×(N−1)+12.60 | 37.00 | 28.70 | Not specified |
These tolerances apply to the attached PA10, PA14, PA16 and PA18 drawings where no individual tolerance is indicated.
| Dimension range | Total pitch tolerance | Nominal dimension tolerance |
|---|---|---|
| Over 0mm to 30mm | ±0.18mm | ±0.20mm |
| Over 30mm to 53mm | ±0.20mm | ±0.25mm |
| Over 53mm to 70mm | ±0.25mm | ±0.30mm |
| Over 70mm to 90mm | ±0.30mm | ±0.35mm |
| Over 90mm to 115mm | ±0.35mm | ±0.44mm |
| Over 115mm to 150mm | ±0.44mm | ±0.55mm |
| Over 150mm to 200mm | ±0.55mm | ±0.70mm |
| Over 200mm to 250mm | ±0.70mm | ±0.80mm |
| Over 250mm to 320mm | ±0.75mm | ±0.90mm |
| Geometric characteristic | Applicable dimension | Tolerance |
|---|---|---|
| Perpendicularity | 0–10mm | 0.2mm |
| Over 10mm | 0.3mm | |
| Symmetry | All | 0.3mm |
| Straightness | Over 0mm to 100mm | 0.2mm |
| Parallelism | Over 100mm to 150mm | 0.3mm |
| Over 150mm | 0.5mm |
Separate technical drawings are attached for PA10H, PA10HWP, PA14H, PA14HWP, PA16H and PA18H. The PA8 and PA12 variants have dimension and section figures above.
