| Part Number: | ULO | - | MJ498D | - | 10 | G | 0 |
|---|---|---|---|---|---|---|---|
| Explanation: |
Brand |
Model MJ498C - 3, 4, 5, 7 or 9 contacts; A housing and 6 plating |
Contacts 3, 4, 5, 7, 9 - MJ498C choices |
Housing Colour A - Grey; MJ498C only |
Contact Plating 6 - Tin; MJ498C only |
MJ498C and MJ498D combine a circular contact interface with cable-side and panel-side connector forms. Their flange sizes, contact layouts and ordering finishes differ. Select by the exact model and contact configuration; no interchangeable M8 or M12 interface is specified.
| Selection | MJ498C | MJ498D |
|---|---|---|
| Contact-count choices | 3, 4, 5, 7, 9 | 2, 3, 4, 5, 7, 10, 14 |
| Housing colour code | A: grey | G: green |
| Contact finish code | 6: tin | 0: gold flash |
| Square flange outline | 26×26mm | 30.60×30.60mm |
| Interface diameter reference | Ø15.70mm | Ø20.80mm |
| Characteristic | Both models |
|---|---|
| Maximum current | 5A |
| Contact resistance | ≤50mΩ |
| Insulation resistance | 1000MΩ; minimum/maximum designation unspecified |
| Dielectric withstand test | 500VAC for 1 minute |
| Insulator | Thermoplastic; material group I; UL94V-0 |
| Contact material | Copper alloy |
The 500VAC figure is a dielectric test value. A separate continuous operating voltage and operating-temperature range are unspecified.
The three ordering fields are contact count, housing colour and contact finish. Use colour code A and finish code 6 for the listed MJ498C configuration.
| MJ498C reference | Dimension |
|---|---|
| Assembly length | 58.80mm REF |
| Rear section diameter | Ø21.40mm |
| Coupling section diameter | Ø23.40mm |
| Interface diameter | Ø15.70mm |
| Flange outer dimensions | 26×26mm |
| Contact layouts illustrated | 3, 4, 7 and 9 in separate face diagrams; 5 in the main face view |
MJ498D uses contact-count choices of 2, 3, 4, 5, 7, 10 or 14, followed by housing colour G and contact finish 0.
| MJ498D reference | Dimension |
|---|---|
| Assembly length | 60.30mm REF |
| Rear section width reference | 23.40mm |
| Sleeve width reference | 31mm |
| Tail reference | 5mm |
| Interface diameter | Ø20.80mm |
| Flange outer dimensions | 30.60×30.60mm |
| Contact layouts illustrated | 2, 3, 4, 7, 10 and 14 in separate face diagrams; 5 in the main face view |
Flange outer dimensions are not mounting-hole centre distances. Nominal thread size, thread pitch, mounting-hole centres and a standardised locking designation are unspecified; assess the exact mating interface and panel layout for the selected model.
