H3A-001-M and H3A-001-F hold one shielded contact assembly. Select the carrier side and the required four-contact or eight-contact assembly separately.
| Carrier | Side | Mounting positions | Length | Body section |
|---|---|---|---|---|
| H3A-001-M | Male side | 1 | 38.50mm | 21×21mm |
| H3A-001-F | Female side | 1 | 37mm | 21×21mm |
The body section excludes the side fastener projection. Consult the drawings for locating and fastening geometry.
| Property | Value |
|---|---|
| Material | Polycarbonate |
| Insulation resistance | ≥1010Ω |
| Limiting temperatures | -40°C to +125°C |
| Flammability according to UL94 | V0 |
| Mechanical working life | ≥500 mating cycles |
These electrical values apply to the contact assembly fitted into the carrier. The contact count is distinct from the carrier's single mounting position.
| Assembly | Contacts | Rated current | Rated voltage | Impulse voltage | Pollution degree |
|---|---|---|---|---|---|
| Q-Coax | 4 + shielding | 10A | 50V | 0.8kV | 3 |
| High Density Q-Coax | 8 + shielding | 5A | 50V | 0.8kV | 3 |
Electrical data are stated according to EN61984.
| Contact assembly property | Value |
|---|---|
| Insulator | Polycarbonate |
| Outer conductor | Nickel-plated zinc alloy |
| Contact resistance | ≤4mΩ |
| Limiting temperatures | -40°C to +85°C |
| Flammability according to UL94 | V0 |
| Cable diameter | 3–9.5mm |
| Contact type | Rated current | Material and finish | Contact resistance | Wire size | AWG |
|---|---|---|---|---|---|
| D-Sub | 5A | Hard-gold-plated copper alloy | ≤3mΩ | 0.09–0.52mm² | 28–20 |
| D | 10A | Hard-gold-plated copper alloy | ≤3mΩ | 0.14–2.5mm² | 26–14 |
Use the limits of the selected contact assembly, cable and housing when specifying the complete connector. The contact assembly's +85°C upper limit is lower than the carrier's +125°C limit.
