| Part Number: | ULO | - | FH414C | - | 1 | * | 4 | 8 | B | 1 | S | T | S |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Explanation: |
Code Prefix |
Model FH414A, FH414B, FH414C, FH414E, FH414F, FH414G, FH414H, FH414I, FH414J, FH414K, FH414L, FH414M, FH414N, FH414O, FH414P - Covered models; FH414D is excluded from this breakdown |
Rows 1 - Single row; FH414A, B, C or O |
Contacts per Row 1–40 - FH414B, C or O: contacts per row |
Field 1 S - Socket; all covered models except C/P |
Field 2 8 - Full gold flash; all covered models except C |
Field 3 B - Black housing; all covered models except C/P |
Field 4 V - Vertical termination; FH414A, E or F; board-clipping tails on J |
Packing or Posts T - Tray; FH414C or P |
Final Posts S - With posts; FH414C or P |
FH414A through FH414P offer single- and dual-row female headers with vertical or side-entry mating and different PCB terminations. Select the contact count, body height, tail arrangement and footprint as one configuration. A common 2.0mm contact pitch does not make these bodies or their solder patterns interchangeable.
| Property | Value |
|---|---|
| Rated current | 3A listed; loading conditions unspecified |
| Insulation resistance | ≥1000MΩ |
| Contact resistance | ≤20mΩ |
| Dielectric withstand | 500VAC RMS for 60 seconds |
| Operating temperature | -45°C to +110°C |
| Retention | ≥500gf; test method unspecified |
| Insulator | High-temperature material with 30% glass fiber; polymer unspecified |
| Material group / flammability | I / UL94V-0 |
| Contacts / finish / color | Copper alloy / full gold flash / black housing |
The dielectric test does not establish continuous working voltage. Storage and soldering limits, certification file numbers and mating-header specifications are unspecified.
| Model | Contact range | Configuration | Key dimensions |
|---|---|---|---|
| FH414A | 1×1 to 1×X | Single-row vertical through-hole | 4.30mm body height; 2.40mm width; 2.70mm tails |
| FH414B | 1×1 to 1×40 | Single-row right-angle side entry | 4.30mm side reference; 2.80mm face width; 3.00mm tail-end reference |
| FH414C | Single-row SMT, R1/R2 alternate tail patterns | 4.30mm front body height; 2.40mm width; 4.10mm tail spread; optional pickup and posts | |
| FH414D | 1×1 to 1×X | Single-row vertical mating with B1/B2 formed tails | 4.30mm height; 2.40mm width; 3.00mm tail projection; 4.00mm tail spread |
| FH414E | 2×2 to 2×X | Dual-row vertical through-hole | 4.30mm height; 4.70mm width; 2.70mm tails |
| FH414F | 2×1 to 2×X | 4.30mm height; 4.00mm width; 2.70mm tails | |
| FH414G | Dual-row SMT | 4.30mm front body / 4.50mm side terminal-level references; 4.60mm width; selectable tail spread B | |
| FH414H | Dual-row low-profile SMT | 2.80mm side body / 2.90mm stepped front extent; 4.00mm width; selectable B | |
| FH414I | Dual-row SMT, posts optional | 4.00mm width; illustrated H=4.50±0.20mm; H and B selectable | |
| FH414J | Dual-row socket with opposed board-clipping tails | 4.30mm height; 4.70mm width; 3.00mm terminal projection; 1.00±0.10mm free gap | |
| FH414K | Dual-row vertical mating with outward-bent tails | 4.30mm height; 4.60mm width; 3.00mm projection; 6.00mm tail spread | |
| FH414L | Dual-row right-angle side entry | 5.00mm depth; 4.90mm face height; B=2.40mm tail projection illustrated | |
| FH414M | 7.30mm depth; 4.90mm face height; 2.60mm tails | ||
| FH414N | Dual-row side-entry SMT | 5.00mm depth; 4.90mm face height; 8.30±0.30mm tail spread | |
| FH414O | 1×1 to 1×40 | Single-row right-angle side entry | 4.30mm outer-depth / 4.00mm body reference; 2.40mm face reference; 3.00±0.30mm tails |
| FH414P | 2×4 to 2×32 populated contacts | Dual-row SMT with optional polarization, pickup and posts | 4.30mm body height; 4.00mm main width; 4.60mm seated reference; 6.20mm tail spread; body length unestablished |
X indicates an unspecified upper limit. FH414D is a single-row socket according to its contact views, section and product shape; the original order chart's 2× notation is inconsistent with that construction. FH414P's closed end positions are not additional active contacts.
| Models | Ordering details |
|---|---|
| A/B/D/E/F/G/H/I/J/K/L/M/N/O | Count, S socket, 8 full gold flash, B black, termination selector |
| A/E/F/J | V termination code; FH414J uses the separately illustrated board-clipping tails |
| B/D/K/L/M/O | R formed right-angle tail code; mating direction remains model-specific |
| G/H/I/N | S SMT; I additionally S with posts or X without posts |
| D | Bend selector 1 B1 / 2 B2 |
| C | Count, 8 full gold flash, B black, bend 1 R1 / 2 R2, pickup S/X, packing T tray / R reel / B tube, posts S/X |
| P | Count, B black, 8 full gold flash, polarization S/X, pickup S/X, packing T tray / R reel / B tube, posts S/X |
For A–O, N denotes positions per row: total contacts for single-row bodies and half the total for dual-row bodies. The usual nominal body length is 2N+0.50mm and contact span is 2(N−1)mm. Length tolerance is ±0.30mm where shown for A/C/D/E/G/H/I/J/L/N and ±0.20mm for K; B/F/M/O do not state that same body-length tolerance. Use each drawing for span and terminal tolerances. FH414P's overall-length formula and active-contact span use an unresolved N definition around the closed ends; no corrected total-length formula is established.
A/B use Ø0.80mm PCB holes on 2.00mm centers. C uses alternating SMT pads, R1/R2 pin-one orientation and optional Ø0.60mm posts at 2(N−2)mm spacing; pad references are 1.00×1.85mm with 5.10mm transverse extent. D uses alternating Ø0.80mm outer tail holes across 4.00mm and Ø1.00mm centerline holes. The C drawing's side 1.00mm body annotation conflicts with the 4.30mm front height; use 4.30mm as the more consistent body-height interpretation. The original annotation remains visible.
E/F mate on a 2.00×2.00mm contact grid and have 0.50×0.20mm tails. Both use Ø0.80mm board holes; E provides a 4.70mm-wide body and F a 4.00mm-wide body. F's contact-span tolerance is ±0.30mm; E's is ±0.20mm.
G has Ø1.10±0.10mm posts, 4–7° tail-angle reference and B tail-spread tolerance ±0.20mm. H has Ø0.70mm posts projecting 0.90mm, 0.40×0.20mm tails and B tolerance ±0.30mm. I has optional Ø0.80mm posts projecting 1.30mm, 0.50±0.05mm-wide tails and selectable H/B dimensions. G/I board patterns have 7.20mm transverse extent; H has 8.00mm. H's pad references are 0.80×2.00mm, and I's are 0.80×2.10mm. Apply the exact locating-hole pattern, not another SMT model's layout.
J's board-thickness annotation is interpreted as 1.20mm, consistent with the 1.00±0.10mm free gap and 3.00mm terminal projection; the original drawing prints 120mm without the decimal. This interpretation is not a board-thickness tolerance specification. K has separate 6.00mm-spaced outer tail rows and 2.00mm-spaced inner clearance rows, with Ø0.80mm and Ø1.00mm holes respectively.
L's tails are 0.60±0.05mm wide and 0.15±0.03mm thick, with 4.65mm board-row spacing. M uses 0.50±0.05mm-wide tails and a 2.00mm board grid. N has 0.60×0.15mm SMT tails, 3.50mm pad-length reference and 9.00mm transverse pad extent. O has 0.50±0.10mm-wide, 0.20±0.05mm-thick tails and Ø0.80±0.05mm holes on 2.00±0.05mm centers.
P supports 2×4 through 2×32 populated contacts and separate polarization, pickup and post selectors. The illustrated pickup is 8.00mm long and 6.00mm wide with a 3.50mm central feature. Pads have 0.80mm width and 2.00mm pitch, with 7.20mm outer extent and 3.00mm inner gap; post holes are Ø1.00mm. Overall length and longitudinal post positions require a resolved drawing for the exact polarized or non-polarized option; do not calculate them from the ambiguous original N formulas. PCB-layout tolerance shown throughout the model drawings is generally ±0.05mm where specified.
