DSPE enclosures use fiberglass reinforced polyester SMC for electrical distribution and control equipment. The nonmetallic body resists rust and corrosion associated with chemical or atmospheric exposure. Its low weight supports handling, machining and installation. Hinges allow the door to open more than 180°.
Parameter
Specification
Material
Fiberglass / SMC polyester
Color
RAL7035
Ingress protection
IP65
Mechanical impact rating
IK08
Working temperature
-40°C to +120°C
Material options
Self-extinguishing or UV-resistant material on request
Standard supply
Enclosure, door with locking system and four wall mounting brackets per set
Mounting plate
Supplied separately to the selected requirement
Opaque and windowed enclosure configurations in the DSPE range.
Enclosure and Accessory Dimensions
Dimensions are in millimeters. The same listed DSPE model reference is used for opaque and windowed door options; specify the required door construction separately. Inner doors and mounting plates have their own dimensions and ordering references.
Opaque / windowed enclosure model
W × H × D (mm)
Inner door model
A × B (mm)
Polyester plate model
M × N (mm)
Galvanized plate model
C × E (mm)
DSPE-325
250 × 300 × 140
Not listed
PP-325
221 × 238
GP-325
263 × 201
DSPE-43
300 × 400 × 200
DSPE-43
364 × 245
PP-43
311 × 286
GP-43
353 × 245
DSPE-44
400 × 400 × 200
DSPE-44
364 × 345
PP-44
308 × 386
GP-44
349 × 345
DSPE-54
400 × 500 × 200
DSPE-54
464 × 345
PP-54
408 × 386
GP-54
453 × 345
DSPE-64
400 × 600 × 230
DSPE-64
564 × 345
PP-64
511 × 386
GP-64
553 × 345
DSPE-65
500 × 600 × 230
DSPE-65
564 × 445
PP-65
508 × 486
GP-65
553 × 447
DSPE-86
600 × 800 × 300
DSPE-86
764 × 545
PP-86
706 × 581
GP-86
749 × 540
Locks and Mounting Fittings
Accessory
Model
Pack quantity
Standard lock
DS-01
1 piece
Key lock
DS705-3E
Wall mounting brackets
DST-01
4 pieces per set
Enclosure and inner-door dimension references, standard and keyed locks, and wall mounting brackets.
