| Part Number: | CMV | 10 | - | 03 | 1 | C2 |
|---|---|---|---|---|---|---|
| Explanation: |
Series CMV - Miniature snap-action switch series |
Current rating 10 - 10A rating family |
Actuator 00 - Bare plunger |
Contact form 1 - 1NO+1NC, Form C |
Terminal C - 250 quick-connect terminal, 0.8mm thickness |
CMV miniature snap-action switches provide compact position detection with exposed quick-connect terminals. The sixteen CMV10 models below combine eight actuator styles with 250 or 187 terminals. Each listed model has 1NO+1NC contacts. Choose the actuator geometry and operating force for the available mechanism travel, then select the terminal that matches the wiring connector.
CMV10-031C2 comprises CMV, current code 10, a hyphen, actuator code 03, contact code 1 and terminal code C2. It identifies a 10A-family long roller lever switch with 1NO+1NC contacts and 187 terminals. Current code 16, contact codes 2 and 3, and actuator code 07 are additional ordering options; their availability and dimensional configuration must be specified separately from the sixteen CMV10 models shown here.
| Segment | Code | Meaning |
|---|---|---|
| Current family | 10 | 10A; use CMV10 load ratings |
| 16 | 16A; use CMV16 load ratings | |
| Contact form | 1 | 1NO+1NC, Form C |
| 2 | 1NC, Form B | |
| 3 | 1NO, Form A | |
| Terminal | C | 250 quick-connect, 0.8mm thickness |
| C2 | 187 quick-connect, 0.5mm thickness |
| 187-terminal model | 250-terminal model | Actuator code | Actuator |
|---|---|---|---|
| CMV10-001C2 | CMV10-001C | 00 | Bare plunger |
| CMV10-011C2 | CMV10-011C | 01 | Short lever |
| CMV10-021C2 | CMV10-021C | 02 | Ultra-short lever |
| CMV10-031C2 | CMV10-031C | 03 | Long roller lever |
| CMV10-041C2 | CMV10-041C | 04 | Short roller lever |
| CMV10-051C2 | CMV10-051C | 05 | Long lever |
| CMV10-061C2 | CMV10-061C | 06 | Long curved lever |
| CMV10-081C2 | CMV10-081C | 08 | Momentary button |
Values are amperes. The 10A and 16A designations identify different rating families; permissible current also depends on voltage and load type. Each merged value applies to both NC and NO contacts. CMV16 data are selection references and do not change the ratings of CMV10 models.
| Family | Voltage | Noninductive load | Inductive load | ||||||
|---|---|---|---|---|---|---|---|---|---|
| Resistive | Lamp | Inductive | Motor | ||||||
| NC | NO | NC | NO | NC | NO | NC | NO | ||
| CMV10 | 250VAC | 10 | 1.5 | 6 | 2 | ||||
| 8VDC | 10 | 3 | 6 | 3 | |||||
| 30VDC | 6 | 3 | 6 | 3 | |||||
| 125VDC | 0.6 | 0.1 | 0.6 | 0.1 | |||||
| 250VDC | 0.3 | 0.05 | 0.3 | 0.05 | |||||
| CMV16 reference | 250VAC | 16 | 2 | 10 | 3 | ||||
| 8VDC | 16 | 4 | 10 | 6 | |||||
| 30VDC | 10 | 4 | 10 | 4 | |||||
| 125VDC | 0.6 | 0.1 | 0.6 | 0.1 | |||||
| 250VDC | 0.3 | 0.05 | 0.3 | 0.05 | |||||
| Parameter | Value and condition |
|---|---|
| Operating speed | 0.1mm/s-1m/s, button type |
| Electrical operating frequency | 20 operations/min |
| Initial contact resistance | 25mΩ maximum |
| Insulation resistance | 100MΩ minimum at 500VDC |
| Minimum applicable load | 24VDC, 10mA |
| Rated insulation voltage Ui | 380V |
| Rated impulse withstand voltage Uimp | 4kV |
| Conventional free-air thermal current Ith | 10A for CMV10; 16A for CMV16 |
| Vibration, malfunction | 10-55Hz, 1.5mm double amplitude |
| Shock, mechanical durability | 1000m/s² |
| Shock, malfunction | 200m/s² |
| Ambient temperature | -20°C to +70°C, without icing |
| Humidity | 85%RH maximum at +5°C to +35°C |
| Dielectric test location | Model family | Test voltage | Duration / frequency |
|---|---|---|---|
| Between terminals of the same polarity | CMV10 / CMV16 | 1000VAC | 1 minute, 50/60Hz |
| Between current-carrying and non-current-carrying metal parts | CMV10 | 1500VAC | |
| CMV16 | 2000VAC |
| Family | Electrical endurance | Condition |
|---|---|---|
| CMV10 | More than 300,000 cycles | 30 operations/min endurance test |
| More than 300,000 cycles | 240VAC, 3A resistive load | |
| More than 50,000 cycles | 240VAC, 10A resistive load | |
| CMV16 reference | More than 100,000 cycles | 30 operations/min endurance test |
The endurance-test frequency is a test condition; the general electrical operating-frequency specification remains 20 operations/min. Enclosure ingress protection is not specified for these exposed-terminal switches.
Each row applies to both terminal versions listed in that row. OF is maximum operating force; RF is minimum release force; PT is maximum pretravel; OT is minimum overtravel; MD is maximum differential travel; OP is operating position. Forces and positions relate to the actuator dimensions shown in the attachment.
| CMV10 model pair | OF | RF | PT | OT | MD | OP |
|---|---|---|---|---|---|---|
| 001C2 / 001C | 2.4N | 0.49N | 1.2mm | 1mm | 0.4mm | 14.7±0.4mm |
| 011C2 / 011C | 1.23N | 0.14N | 4mm | 1.6mm | 1.5mm | 15.2±1.2mm |
| 021C2 / 021C | 2.4N | 0.49N | 1.6mm | 0.8mm | 0.6mm | 15.2±0.5mm |
| 031C2 / 031C | 1.23N | 0.14N | 4mm | 1.6mm | 1.5mm | 20.7±1.2mm |
| 041C2 / 041C | 2.7N | 0.49N | 1.5mm | 0.8mm | 0.6mm | 20.7±0.6mm |
| 051C2 / 051C | 0.69N | 0.06N | 9mm | 2mm | 2.8mm | 15.2±3mm |
| 061C2 / 061C | 1.2N | 0.14N | 4mm | 1.5mm | 1.5mm | 18.7±1.2mm |
| 081C2 / 081C | 2.4N | 0.49N | 1.2mm | 1mm | 0.4mm | 40.5±0.5mm |
In the movement diagram, FP denotes free position, RP release position, TTP total-travel position, TT total travel and TF total-travel force. COM, NC and NO identify the common, normally closed and normally open terminals. Select the contact form before specifying the external circuit.
The basic body measures 27.8×10.3×15.9mm, with 22.2±0.1mm mounting centers. The terminal envelope differs between C and C2 versions. Use the complete outline and tolerances for the exact model before preparing mounting holes or connector clearance.
| Actuator code | Illustrated selection dimensions |
|---|---|
| 01 | 35.6±0.8mm short lever |
| 02 | 22.9mm ultra-short lever |
| 03 | 34±0.8mm long roller lever; Ø4.8×4.8mm roller |
| 04 | 21.1±0.8mm short roller lever; Ø4.8×4.8mm roller |
| 05 | 54.2±0.8mm long lever |
| 06 | 33.2±0.8mm long curved lever |
| 08 | Ø13mm momentary button |
Lever thickness is 0.6mm stainless steel. Metal rollers can be specified separately for roller-lever models. Mount with M3 screws, flat washers and spring washers at 0.39-0.59N·m. Align the matching 187 or 250 female connector with its terminal and push straight on. Sideways, upward or downward force can deform the terminal or damage the housing.
| Recommended cable type | Cores | Conductor | Finished outside diameter |
|---|---|---|---|
| Plastic/rubber-insulated flexible cable | 2, 3 or 4 | 0.5-0.75mm² | Round, Ø6-9mm |
| 600V plastic-insulated, plastic-sheathed VF cable | 2 | Ø1mm, Ø1.2mm or Ø1.6mm |
Avoid silicone-oil-containing cable materials because contamination can impair contact reliability. Standard contacts require at least 24VDC/10mA. For smaller signals, specify an appropriate low-load version; contacts already used on general loads must not be reassigned to small loads. Use suitable RC suppression and contact protection where bounce, noise or impulse current can reduce endurance.
| Designation | Referenced standard | Documentation |
|---|---|---|
| CCC | GB/T 14048.5 | Request the documentation applicable to the ordered model |
| TUV | EN 61058 | |
| CE |
| Voltage | CMV10 rating | CMV16 rating |
|---|---|---|
| 250VAC | 10A | 16A |
| 250VDC | 0.3A | 0.3A |
The associated rating test states 50,000 cycles at T105, 0-105°C. This test condition does not replace the general -20°C to +70°C operating range. Personnel protection, high-reliability infrastructure, outdoor or harsh chemical environments, fire or explosion hazards, nuclear, military and aerospace applications require a separately specified design and application approval.
