CMS50 miniature single-color warning lights provide steady or flashing LED indication in a low oval enclosure. The body measures110×52mm in plan and50mm in overall height. A PC lens sits on an ABS base, with screw mounting or a magnetic option.
Choose red, yellow, green, blue or white indication, with no sound, an intermittent beep or police-siren sound. Supply options are12VAC/DC,24VAC/DC and220VAC. The common red models below use flashing operation and0.2m cable.
| Field | Codes and meanings |
|---|---|
| Series | CMS — Miniature single-color warning light |
| Size identifier | 50 — Size class; body110×52×50mm |
| Color | R — Red Y — Yellow G — Green B — Blue W — White |
| Sound | Omitted — No sound A — Intermittent beep C — Police siren |
| Light | T — Steady W — Flashing |
| Supply | J — 12VAC/DC B — 24VAC/DC M — 220VAC |
| Function | Omitted — Regular single light: IP43 F — IP65 version K — Anti-interference version |
| Mount | Omitted — Fixed screw installation F — Magnetic mounting; specify the configuration separately |
| Cable length | L02 — 0.2m L1–L5 — L1 indicates1m; length is not limited to L5 |
| Connection | Omitted — Free cable ends M… — M-type connector D… — DT-type connector A… — AMP-type connector S… — SM-type connector; specify complete connector configurations |
| Cable material | Omitted — PVC sheathed cable U — PUR sheathed cable VP — Shielded PVC sheathed cable UP — Shielded PUR sheathed cable |
CMS50-R/AWB-L02 identifies red indication, intermittent beep, flashing operation,24VAC/DC supply, screw mounting and0.2m cable. The F protection function and F magnetic mount occupy different ordering positions.
All four models use screw mounting and0.2m cable.
| Model | Sound | Supply |
|---|---|---|
| CMS50-R/WB-L02 | No sound | 24VAC/DC |
| CMS50-R/WM-L02 | 220VAC | |
| CMS50-R/AWB-L02 | Intermittent beep | 24VAC/DC |
| CMS50-R/AWM-L02 | 220VAC |
| Version | Rating condition | Maximum current | Power reference |
|---|---|---|---|
| CMS50 without sound | 12VDC | 43mA | 0.6W |
| 24VDC | 91mA | 2.2W | |
| 220VAC | 76mA | 1W | |
| CMS50-C siren | 12VDC | 50mA | 0.6W |
| 24VDC | 97mA | 2.4W | |
| 220VAC | 160mA | 2.7W |
Current and power references are separately stated values. The A intermittent-beep option has no separate electrical or sound-level ratings specified here. DC rating conditions remain distinct from the AC/DC supply options.
| LED bead color | Bead voltage |
|---|---|
| Red | 1.8–2.2V |
| Yellow | |
| Green | 2.8–3.4V |
| Blue | |
| White |
Bead voltage describes the LED component, separately from the light's supply. High-brightness LED components have a typical life reference above50,000 hours, separately from complete-assembly service life.
| Parameter | Specification |
|---|---|
| Maximum sound level | C siren version:90dB; measurement distance unspecified |
| Flashing frequency | 55–65 flashes/min; nominal60 flashes/min |
| Body footprint / height | 110×52mm /50mm |
| Lens / base | PC / ABS |
| Cord specification | UL1007 |
| Installation screws | Stainless steel |
| Ambient temperature | −30°C to +50°C |
| Relative humidity | ≤85% |
| Protection | Regular single light: IP43; F function: IP65 |
| Altitude | ≤2000m |
| Compliance reference | Standard | Document reference |
|---|---|---|
| CE | EN61058 | Document number not specified |
| Configuration | Dimensions in mm |
|---|---|
| CMS50 screw mount | Overall110×52×50; upper lens/body section44 included in overall height; two fixing points on95.9 centers |
Disconnect power before installation, wiring, work on the light or maintenance. Check the selected configuration and supply, secure the mounting, exclude conductive dust and liquid, and protect wiring against impact and abrasion. Qualified personnel should service complex faults and high-voltage components.
The light is intended for industrial signaling. High-reliability infrastructure, personal-safety functions, harsh environments, fire or explosion hazards, military uses and aerospace projects require a specifically designed and expressly confirmed configuration.
