CLM70 multifunction LED beacons offer adjustable rotating, steady, flashing and strobe light in a 70mm body. The S light configuration defaults to rotating operation. Choose a silent version or K sound configuration with adjustable intermittent beep and police-siren sound; the sound configuration defaults to the siren setting.
Five lens colors and screw, magnetic or L-shaped bracket mounting options support different signaling installations. The D supply configuration provides selectable12VAC/DC,24VAC/DC and220VAC settings. Select the appropriate setting for the connected supply before operation.
| Field | Code | Selection |
|---|---|---|
| Series | CLM | Multifunction tower light |
| Size | 70 | 70mm body diameter |
| Color | R | Red |
| Y | Yellow | |
| G | Green | |
| B | Blue | |
| W | White | |
| Sound | Omitted | No sound |
| K | Adjustable intermittent beep / police siren; factory default siren | |
| Light mode | S | Adjustable rotating / steady / flashing / strobe; factory default rotating |
| Supply | D | Selectable12VAC/DC /24VAC/DC /220VAC |
| Function | Omitted | Regular single light: IP43 |
| F | IP65 version | |
| K | Anti-interference version | |
| Mount | Omitted | Fixed screw installation |
| F | Magnetic mounting; specify the configuration separately | |
| E | L-shaped bracket | |
| Cable length | L02 | 0.2m |
| L1–L5 | L1 indicates1m; length is not limited to L5 | |
| Connection | Omitted | Free cable ends |
| M… | M-type connector; specify its complete configuration | |
| D… | DT-type connector; specify its complete configuration | |
| A… | AMP-type connector; specify its complete configuration | |
| S… | SM-type connector; specify its complete configuration | |
| Cable material | Omitted | PVC sheathed cable |
| U | PUR sheathed cable | |
| VP | Shielded PVC sheathed cable | |
| UP | Shielded PUR sheathed cable |
CLM70-R/KSD-EL02 specifies red indication, adjustable sound, adjustable light modes and supply settings, an L-shaped bracket and0.2m cable. K identifies sound in the sound position and anti-interference in the separate function position; F likewise distinguishes protection from magnetic mounting by its position.
All four models have S adjustable light modes, D selectable supply settings and0.2m cable. Rotating light is the factory default; K sound models default to police-siren sound.
| Model | Sound | Mount |
|---|---|---|
| CLM70-R/SD-L02 | No sound | Screw |
| CLM70-R/KSD-L02 | Adjustable beep / siren | |
| CLM70-R/SD-EL02 | No sound | L-shaped bracket |
| CLM70-R/KSD-EL02 | Adjustable beep / siren |
| Version | Rating condition | Maximum current | Power reference |
|---|---|---|---|
| CLM70 without sound | 12VDC | 43mA | 0.6W |
| 24VDC | 91mA | 2.2W | |
| 220VAC | 76mA | 1W | |
| CLM70-K adjustable sound | 12VDC | 50mA | 0.6W |
| 24VDC | 97mA | 2.4W | |
| 220VAC | 160mA | 2.7W |
Current and power references are separately stated values. The listed DC rating conditions are distinct from the AC/DC supply options in the ordering guide.
| LED bead color | Bead voltage |
|---|---|
| Red | 1.8–2.2V |
| Yellow | |
| Green | 2.8–3.4V |
| Blue | |
| White |
LED bead voltage is a component parameter, separately from the beacon supply. High-brightness LED components have a typical life reference above50,000 hours, separately from complete-assembly service life.
| Parameter | Specification |
|---|---|
| Maximum sound level | K sound configuration:90dB; measurement distance and mode-specific levels unspecified |
| Flashing frequency reference | 55–65 flashes/min; nominal60 flashes/min |
| Body diameter / height | 70mm /86.6mm |
| Lens / base | PC / ABS |
| Cord specification | UL1007 |
| Installation screws | White plated finish |
| Ambient temperature | −30°C to +50°C |
| Relative humidity | ≤85% |
| Protection | Regular single light: IP43; F function: IP65 |
| Altitude | ≤2000m |
The flashing-frequency reference does not define rotating-light speed or strobe pulse timing.
| Compliance reference | Standard | Document reference |
|---|---|---|
| CE | EN61058 | Document number not specified |
| Configuration / reference | Dimensions in mm |
|---|---|
| CLM70 screw mount | BodyØ70×86.6; lower base section32.5 included in the overall height; three Ø4 fixing points onØ37 at120°; calculated adjacent-center spacing32.0 |
| CLM70 with E mount / CLM70-E bracket | Same beacon body; bracket envelope97; vertical section97×72; projection30; Ø4 fixing reference; slots7.5×4.5 on42 centers |
Disconnect power before installation, wiring, operation work or maintenance. Check the selected configuration and supply setting, secure the mounting, exclude conductive dust and liquid, and protect wiring against impact and abrasion. Seek qualified service for complex faults and high-voltage components.
The beacon is intended for industrial signaling. High-reliability infrastructure, personal-safety functions, harsh environments, fire or explosion hazards, military uses and aerospace projects require a specifically designed and expressly confirmed configuration.
