CLE70 LED warning beacons combine a70mm cylindrical PC lens with an ABS base. Choose fixed rotating, steady, flashing or strobe operation, or the S configuration with four adjustable light modes and rotating operation as the factory default. Red, yellow, green, blue and white single-color options are available.
Sound choices include silent operation, an intermittent beep, a police siren or adjustable beep/siren sound. Fixed12VAC/DC,24VAC/DC and220VAC supply options are complemented by the D selectable-supply configuration. Screw mounting is standard, with magnetic and L-shaped bracket options.
| Field | Code | Selection |
|---|---|---|
| Series | CLE | Single-color tower light |
| Size | 70 | 70mm body diameter |
| Color | R | Red |
| Y | Yellow | |
| G | Green | |
| B | Blue | |
| W | White | |
| Sound | Omitted | No sound |
| A | Intermittent beep | |
| C | Police siren | |
| K | Adjustable beep / siren; factory default siren | |
| Light | X | Rotating light |
| T | Steady | |
| W | Flashing | |
| B | Strobe | |
| S | Adjustable rotating / steady / flashing / strobe; factory default rotating | |
| Supply | J | 12VAC/DC |
| B | 24VAC/DC | |
| M | 220VAC | |
| D | Selectable12VAC/DC /24VAC/DC /220VAC | |
| Function | Omitted | Regular single light: IP43 |
| F | IP65 version | |
| K | Anti-interference version | |
| Mount | Omitted | Fixed screw installation |
| F | Magnetic mounting; specify the configuration separately | |
| E | L-shaped bracket | |
| Cable length | L02 | 0.2m |
| L1–L5 | L1 indicates1m; length is not limited to L5 | |
| Connection | Omitted | Free cable ends |
| M… | M-type connector; specify its complete configuration | |
| D… | DT-type connector; specify its complete configuration | |
| A… | AMP-type connector; specify its complete configuration | |
| S… | SM-type connector; specify its complete configuration | |
| Cable material | Omitted | PVC sheathed cable |
| U | PUR sheathed cable | |
| VP | Shielded PVC sheathed cable | |
| UP | Shielded PUR sheathed cable |
CLE70-R/KSD-L02 specifies red indication, adjustable beep/siren sound, adjustable light modes, selectable supply settings, screw mounting and0.2m cable. K, F and B have different meanings in their separate ordering positions. D denotes selectable settings, rather than a continuously variable supply range.
| Model | Sound | Light | Supply | Cable |
|---|---|---|---|---|
| CLE70-R/XB-L02 | No sound | Rotating | 24VAC/DC | 0.2m |
| CLE70-R/XM-L02 | 220VAC | |||
| CLE70-R/CXB-L02 | Police siren | 24VAC/DC | ||
| CLE70-R/CXM-L02 | 220VAC | |||
| CLE70-R/KSD-L02 | Adjustable beep / siren; default siren | Four adjustable modes; default rotating | Selectable12VAC/DC /24VAC/DC /220VAC |
| Version | Rating condition | Maximum current | Power reference |
|---|---|---|---|
| CLE70 without sound | 12VDC | 42mA | 0.5W |
| 24VDC | 92mA | 2.2W | |
| 220VAC | 80mA | 1.1W | |
| CLE70-C siren | 12VDC | 51mA | 0.6W |
| 24VDC | 96mA | 2.3W | |
| 220VAC | 160mA | 2.7W |
Current and power references are separately stated values. Separate electrical and sound-level ratings for A and K sound configurations are unspecified. DC rating conditions remain distinct from the AC/DC supply options.
| LED bead color | Bead voltage |
|---|---|
| Red | 1.8–2.2V |
| Yellow | |
| Green | 2.8–3.4V |
| Blue | |
| White |
Bead voltage describes the LED component, separately from beacon supply. High-brightness LED components have a typical life reference above50,000 hours, separately from complete-assembly service life.
| Parameter | Specification |
|---|---|
| Maximum sound level | C siren version:90dB; measurement distance unspecified |
| Flashing frequency reference | 55–65 flashes/min; nominal60 flashes/min |
| Body diameter / height | 70mm /114mm |
| Lens / base | PC / ABS |
| Cord specification | UL1007 |
| Installation screws | White plated finish |
| Ambient temperature | −30°C to +50°C |
| Relative humidity | ≤85% |
| Protection | Regular single light: IP43; F function: IP65 |
| Altitude | ≤2000m |
The flashing reference does not specify rotating-light speed or strobe timing.
| Compliance reference | Standard | Document reference |
|---|---|---|
| CE | EN61058 | Document number not specified |
| Configuration | Dimensions in mm |
|---|---|
| CLE70 screw mount | BodyØ70×114; upper section74 included in overall height; three Ø4 fixing points onØ37 at120°; calculated adjacent-center spacing32.0 |
Disconnect power before installation, wiring, work on the beacon or maintenance. Check the selected configuration and rated supply, secure the mounting, exclude conductive dust and liquid, and protect wiring from impact and abrasion. Qualified personnel should service complex faults and high-voltage components.
The beacon is intended for industrial signaling. High-reliability infrastructure, personal-safety functions, harsh environments, fire or explosion hazards, military uses and aerospace projects require a specifically designed and expressly confirmed configuration.
