| Part Number: | CDE6 | - | 1 | 10 | Z |
|---|---|---|---|---|---|
| Explanation: |
Product Family CDE6 - DIN rail temperature and humidity controller |
Output Function 1 - One voltage-free normally open relay output, terminals 13–14 |
Output Contact Rating 10 - 10A contact version |
Rated Operating Voltage Z - 100–240VAC/DC nominal supply; AC 50/60Hz |
CDE6 controls cabinet temperature and humidity through four selectable operating modes and one voltage-free normally open relay output. A capacitive humidity sensor and front knobs provide local humidity and temperature threshold adjustment for fans, thermoelectric cooling devices or heating elements within the contact ratings.
| Complete model | Function | Output | Nominal supply code |
|---|---|---|---|
| CDE6-110Z | Temperature and humidity control | One normally open contact, 13–14; Ith 10A; Ie 2.5A | Z: 100–240VAC/DC |
| Position | Code | Meaning |
|---|---|---|
| 1: Family | CDE6 | DIN rail temperature and humidity controller |
| 2: Function | 1 | One relay output |
| 3: Contact rating | 10 | 10A contact version |
| 4: Operating voltage | Z | 100–240VAC/DC nominal supply; AC 50/60Hz |
| A–Z letter combination | Custom voltage, identified by the ordered specification |
RH is ambient relative humidity, RHset is the humidity threshold, Tamb is ambient temperature, Tset is the temperature threshold and OUT is the active output state. Select the output condition required by the connected heating, cooling or humidity-control load.
| Mode | Output active condition | Monitored variables |
|---|---|---|
| HT | RH > RHset OR Tamb > Tset | Humidity and temperature |
| TH | RH < RHset AND Tamb < Tset | Humidity and temperature |
| HM | RH > RHset | Humidity |
| HI | RH < RHset | Humidity |
| Parameter | Rating |
|---|---|
| Supply terminals | A1–A2 |
| Nominal Z supply | 100–240VAC/DC; AC 50/60Hz |
| AC operating range | 85–240VAC, 50/60Hz |
| Power consumption | 1W |
| Setting accuracy | 10% |
| Temperature setting range | 10–60°C |
| Humidity setting range | 50–90%RH |
| Temperature accuracy error | ±2°C |
| Humidity accuracy error | ±3%RH in the 20–80%RH range; ±7%RH below 20%RH or above 80%RH |
| Output | One voltage-free normally open contact, 13–14; 10A contact rating at 250VAC/24VDC |
| Common model contact currents | Ith 10A; Ie 2.5A |
| Indicators | Green supply LED; red relay-state LED |
The humidity accuracy bands describe sensing performance and are distinct from the 50–90%RH threshold-setting range. The nominal supply code and the AC operating range are listed separately; use the voltage marked on the ordered controller. The contact switching voltage does not provide power to the load.
| Parameter | Rating |
|---|---|
| Operating temperature | −20 to +55°C |
| Storage and transport temperature | −35 to +75°C |
| Mounting | 35mm DIN rail |
| Installation altitude / pollution degree | ≤2000m / 2 |
| Conductors / tightening torque | 1×2.5mm² or 2×1.5mm² / 0.4N·m |
| Overall dimensions / weight | 90×18×50mm / 65g |
| Conformity designation | CE; applicable documentation depends on the ordered model |
Power the controller at A1/A2 and place the normally open 13/14 contact in the load control circuit. The example connects a PTC load to its own supply through the relay contact. Select the control mode and the contact loading for the device being switched.
The controller is intended for temperature and humidity control in power distribution cabinets. Industrial products of this type are not intended for exceptionally high-reliability nuclear, gas or power systems; personal or property safety functions; harsh outdoor, contaminated, electromagnetic, vibration or shock environments; fire or explosion hazards; or military and aerospace applications unless specifically designed for that use and confirmed in writing.
