| Part Number: | ULO | - | HC04 | - | H32A | - | SF | - | 4B | - | MCV | - | M32 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Explanation: |
Manufacturer ULO - ULO Electronics |
Housing Series HC02 - Size 10A; use H10A |
Housing Size H10A - Size 10A, HC02, locking code 1L |
Base Type SF - Surface mounting base with side cable entry |
Locking 1L - Single latch, sizes 10A or 16A |
Protective Cover MCV - Aluminium cover; locking code 1L or 4B |
Entry Thread M20 - Sizes 10A or 16A |
These grey, powder-coated aluminium bases mount through external feet and provide side cable entry for rectangular heavy duty connector assemblies. 10A, 16A and 32A identify housing sizes. Select the housing size, locking arrangement and entry thread together with the required insert and mating hood dimensions.
| Property | Specification |
|---|---|
| Housing construction | Die-cast aluminium |
| Finish and colour | Powder-coated, grey |
| Temperature range | -40°C to +125°C |
| Ingress protection | IP65 according to IEC60529 for the coupled connector |
| Cable entry | Side entry; M or PG thread selected by model |
| Fitted latch material | Metal, galvanized/nickel plated, on 1L and 2L versions |
| Hood/housing sealing | NBR on 16A CV and MCV versions and all listed 32A versions |
1L versions have one locking latch. 2L versions have two locking latches. The four studs on 4B versions engage a matching double-latch hood. CV denotes a PC protective cover and MCV an aluminium protective cover. Replace XX with one of the thread suffixes listed for that row.
| Model family | Housing size | Locking arrangement | Cover | Entry thread suffixes |
|---|---|---|---|---|
| ULO-HC02-H10A-SF-1L-XX | 10A | Single latch | Without protective cover | M20, M25, PG16, PG21 |
| ULO-HC02-H10A-SF-1L-CV-XX | PC | |||
| ULO-HC02-H10A-SF-1L-MCV-XX | Aluminium | |||
| ULO-HC03-H16A-SF-1L-XX | 16A | Without protective cover | ||
| ULO-HC03-H16A-SF-1L-CV-XX | PC | |||
| ULO-HC03-H16A-SF-1L-MCV-XX | Aluminium | |||
| ULO-HC04-H32A-SF-2L | 32A | Double latch | Without protective cover | M25, M32, PG21, PG29 |
| ULO-HC04-H32A-SF-4B-XX | Four studs for double locking | |||
| ULO-HC04-H32A-SF-4B-CV-XX | PC | |||
| ULO-HC04-H32A-SF-4B-MCV-XX | Aluminium |
The combined 10A family designation ULO-HC02-H10A-SF-1L-CV-MCV-XX covers the separate CV and MCV selections above. The 32A double-latch base uses an appended thread suffix, for example ULO-HC04-H32A-SF-2L-M25.
Dimensions below are in mm. Body height excludes the raised latch and open cover. Allow additional space for the illustrated latch swing, cover travel and cable fittings.
| Base configuration | Length including entry bosses | Foot width | Body height | Mounting hole centres | Mounting hole diameter | Additional drawing dimensions |
|---|---|---|---|---|---|---|
| 10A, uncovered or CV/MCV | 75mm | 50mm | 52.5mm | 48mm × 40mm | 4.5mm | Latch swing extends 12mm beyond the foot; covered version: 104mm open height and 49mm cover sweep beyond the foot edge |
| 16A, uncovered or CV/MCV | 95.5mm | 57mm | 64mm × 40mm | Latch swing extends 12mm beyond the foot; covered versions: 108.5mm open height and 49mm cover sweep beyond the foot edge | ||
| 32A, 2L double latch | 105.5mm | 56.5mm | 81.5mm | 94mm × 46mm | 5.5mm | Latch swing extends 13mm beyond each end |
| 32A, 4B uncovered | Entry centre height: 26.5mm | |||||
| 32A, 4B with CV or MCV | Entry centre height: 26.5mm; open cover projects 25mm beyond the foot edge, with an 85mm swept clearance |
