A-Coded M5 Panel Receptacles with Solder and PCB Pins

Series Part Number

Part Number:	ULO	-	CC01	-	M5A	-	04	P	-	MM	-	SD	-	SFA	01
Explanation:	Code Prefix		Series		Interface M5A - A-coded M5×0.5 mating interface		Contacts 03 - 3 contacts 04 - 4 contacts	Contact Unit		Gender MM - Male contacts FF - Female contacts		Termination SD - Solder cups with fixed SF001, SF002 or SH001 tail; lead wires with SFA, SFB or SHA tail SP - Straight PCB pins; fixed SF001, SF002 or SH001 tail only		Body Code SF001 - MM-SD or MM-SP rear-mount fixed configuration; omit the following length field SF002 - FF-SD or FF-SP rear-mount fixed configuration; omit the following length field SH001 - MM-SD, MM-SP, FF-SD or FF-SP front-mount fixed configuration; omit the following length field SFA - MM-SD rear-mount lead-wire body, or FF-SD lead-wire body with exact fitting unassigned; add length code SFB - FF-SD rear-mount lead-wire body; add length code SHA - MM-SD front-mount lead-wire body; add length code	Lead Length 01–99 - 1–99m; only after SFA, SFB or SHA on the SD lead-wire configurations Blank - Omit this field after the fixed SF001, SF002 or SH001 body code

Description

A-coded M5 device connections

This family comprises twelve panel receptacle configurations with an M5×0.5 mating interface and either three or four contacts. FF denotes female contacts and MM denotes male contacts. Solder-cup, straight PCB-pin and individual lead-wire terminations are separate configurations; select the complete model rather than inferring the termination from a partial code.

All model patterns begin CC01-M5A-XXP-. In the tables below, the suffix completes that pattern, and XXP is replaced by 03P or 04P.

Female contact configurations

Model suffix	Termination	Panel arrangement	Body length	Panel cutout
FF-SD-SF002	Solder cups	Rear mounting, M7×0.75 fitting	11.5mm	Ø7.2±0.1mm
FF-SD-SFAXX	Individual lead wires	Ø6mm smooth body; exact mounting fitting not established		Not established
FF-SD-SH001	Solder cups	Front mounting, Ø6mm smooth body		Not established
FF-SD-SFBXX	Individual lead wires	Rear mounting, M7×0.75 fitting		Ø7.2±0.1mm
FF-SP-SF002	Straight PCB pins	Rear mounting, M7×0.75 fitting		Ø7.2±0.1mm
FF-SP-SH001	Straight PCB pins	Front mounting, M5×0.5 rear fitting; Ø6mm body		Not established

FF-SD-SFAXX, FF-SD-SH001 and FF-SP-SH001 require a part-specific panel fit check. No panel machining diameter is assigned to these three variants here.

M5 female SD SF002 receptacle — FF-SD-SF002 rear-mount female receptacle with solder cups.

M5 female SD SFAXX receptacle — FF-SD-SFAXX female lead-wire body; exact panel fit is not established.

M5 female SD SH001 receptacle — FF-SD-SH001 front-mount solder-cup body; panel cutout is not assigned.

M5 female SD SFBXX receptacle — FF-SD-SFBXX rear-mount female body with individual lead wires.

M5 female SP SF002 receptacle — FF-SP-SF002 rear-mount female body with straight PCB tails.

M5 female SP SH001 receptacle — FF-SP-SH001 front-mount female PCB-pin body; panel cutout is not assigned.

Male contact configurations

Model suffix	Termination	Panel arrangement	Body length	Panel cutout
MM-SD-SF001	Solder cups	Rear mounting, M5×0.5 fitting	11.2mm	Ø5.2±0.1mm
MM-SD-SFAXX	Individual lead wires	Rear mounting, M5×0.5 fitting
MM-SD-SH001	Solder cups	Front mounting, M5×0.5 fitting
MM-SD-SHAXX	Individual lead wires	Front mounting, M5×0.5 fitting
MM-SP-SF001	Straight PCB pins	Rear mounting, M5×0.5 fitting
MM-SP-SH001	Straight PCB pins	Front mounting, M5×0.5 fitting

Body lengths are the indicated axial dimensions and exclude extending contacts or lead wires. The 5.5mm and 4mm fitting references shown on applicable outlines are not specified panel-thickness limits. Front SP-SH001 male and female variants are listed as unshielded; no shielding configuration is assigned to the other variants.

M5 male SD SF001 receptacle — MM-SD-SF001 rear-mount male receptacle with solder cups.

M5 male SD SFAXX receptacle — MM-SD-SFAXX rear-mount male receptacle with lead wires.

M5 male SD SH001 receptacle — MM-SD-SH001 front-mount male receptacle with solder cups.

M5 male SD SHAXX receptacle — MM-SD-SHAXX front-mount male receptacle with lead wires.

M5 male SP SF001 receptacle — MM-SP-SF001 rear-mount male receptacle with straight PCB pins.

M5 male SP SH001 receptacle — MM-SP-SH001 front-mount male receptacle with straight PCB pins.

Electrical and environmental specifications

Property	All twelve configurations
Coding and contact options	A coding; 3 or 4 contacts
Rated voltage	60V
Rated current	1A
Withstand voltage	800V; test duration and waveform unspecified
Contact resistance	≤3mΩ
Protection	IP67
Operating temperature	-25°C to +85°C
Mechanical life	≥100 mating cycles
Salt-spray duration	48h; detailed test method unspecified

Contact arrangement and PCB layout

The three-contact option uses contact numbers 1, 3 and 4. The four-contact option uses 1, 2, 3 and 4. Male and female mating faces are mirrored; use the exact contact-face view when wiring. Lead-wire colors and conductor cross-sections are unspecified.

PCB-pin variant group	Three-contact footprint	Four-contact footprint	Grid spacing
FF-SP-SF002, FF-SP-SH001, MM-SP-SF001, MM-SP-SH001	3 holes, Ø0.7±0.1mm	4 holes, Ø0.7±0.1mm	1.25mm horizontally and vertically

The three-contact footprint occupies three positions on the grid. Its orientation must follow the matching model drawing; do not substitute the face-view orientation for the PCB view.

Lead-wire lengths

Length codes are provided for FF-SD-SFAXX, FF-SD-SFBXX, MM-SD-SFAXX and MM-SD-SHAXX only. Their final XX field specifies 01–99 for a nominal length of 1–99m, shown separately as L in the drawings. Jacket composition and shielding are unspecified for these lead-wire options.

Lead length	Tolerance
1–5m	±50mm
6–10m	±100mm
11–30m	±200mm
31–99m	±500mm

Materials

Component	Material
Contacts	CuZn, gold-plated contact surfaces
Contact carrier	PA
Metal body / coupling component	Nickel-plated copper alloy
Seal	Silicone
Listed flammability class	UL94V-0

A-Coded M5 Device Receptacles