| Part Number: | ULO | - | TB11 | - | 350 | / | 3.5 | - | 02 | P | - | 4 | 000A |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Explanation: |
Manufacturer ULO - ULO Electronics |
Series TB11 - 3.5mm pitch |
Model 350 - Standard pin layout |
Pitch 3.5 - 3.5mm, TB11 only |
Poles 02–24 - 2–24 poles, written with two digits |
Pole Unit P - Poles |
Color 1 - Grey |
Customer Code 000A - Fixed customer requirements code shown in the drawings |
350 terminal blocks provide screw wire termination with a protective stainless-steel spring and one row of PCB pins. Choose the 3.5mm or 3.96mm pitch and the standard or R body orientation. Available assemblies have 2–24 poles.
| Model | Pitch | Configuration | UL use-group B rating |
|---|---|---|---|
| TB11-350/3.5 | 3.5mm | Standard orientation | 10A, 300V |
| TB11-350R/3.5 | R orientation | ||
| TB17-350/3.96 | 3.96mm | Standard orientation | 7A, 300V |
| TB17-350R/3.96 | R orientation |
Use the individual outline to position the wire entry, screw access and PCB pins. The R orientation has a different pin-exit direction relative to the body.
All four models are rated 10A, 130V under IEC overvoltage category III and pollution degree 2. Rated impulse voltage differs by model.
| Model | Overvoltage category | Pollution degree | Rated voltage | Rated impulse voltage |
|---|---|---|---|---|
| TB11-350/3.5 | III | 2 | 130V | 2.5kV |
| TB11-350R/3.5 | 1.25kV | |||
| TB17-350/3.96 | ||||
| TB17-350R/3.96 |
Ratings for IEC category III/pollution degree 3 and category II/pollution degree 2 are unspecified. The general UL rating is 10A, 300V without a stated use group. Use-group B ratings are listed separately in the selection table; TB17 models specify 7A for that group. Use groups C and D and certificate file numbers are unspecified.
| Characteristic | All four models |
|---|---|
| Connection method | Screw clamp with wire-protection spring |
| Solid conductor cross section | 0.5–1.0mm² |
| Flexible conductor cross section | 0.5–1.0mm² |
| Flexible conductor with ferrule | 0.5–1.0mm² |
| UL wire range | 24–18AWG |
| Wire-clamp screw | M2 |
| Tightening torque | 0.2N·m |
| Stripping length | 5mm |
| Separate fixing screw and torque | Not specified |
| Characteristic | Specification |
|---|---|
| Housing | PA66, insulation material group I, UL94V-0 |
| Contact material and finish | Copper alloy, tin plated |
| Clamping cage | Brass, tin plated |
| Protection spring | Stainless steel |
| Screw | Zinc-plated steel, M2 |
| Number of poles and rows | 2–24 poles; one row |
| Protection level | IP20 |
| Operating temperature | -40°C to +105°C |
| Material compliance | RoHS compliance declared |
The housing bills of materials list 2-pole and 3-pole PA66 sections for TB11-350, TB11-350R and TB17-350. TB17-350R lists PA66 housing without a section size. Assembly quantities for individual pole counts are unspecified.
| Field | Meaning |
|---|---|
| Series | TB11 for 3.5mm pitch; TB17 for 3.96mm pitch |
| Model code | 350 or 350R, followed by the pitch |
| Pole field XXP | 02–24P |
| Colour field Y | 1 grey; 2 blue; 3 black; 4 green; 5 orange; 6 red; 7 transparent; 8 yellow; 9 white |
| Customer suffix | 000A shown in the model drawings |
| General screw-head field | 0 slot; 1 cross |
| General screw-clamping field | 0 screw down; 1 screw up |
| General standard-product field | 0A |
Use the 02–24P pole field with the exact model and pitch. Illustrations show green housings; not every colour and suffix combination is specified.
N is the number of poles. Formula results are in millimetres. Standard versions have an 8.75mm body height and a 7.00mm body depth; PCB edge references are shown in their individual layouts.
| Dimension | TB11-350/3.5 | TB17-350/3.96 |
|---|---|---|
| Body length | [3.5N]mm | [3.96N]mm |
| First-to-last pin span | 3.5(N−1)mm | 3.96(N−1)mm |
| Pin pitch | 3.50mm | 3.96mm |
| End-to-first-pin reference | 1.75mm | 1.98mm |
| PCB edge-to-pin-row reference | 3.50mm | |
| Pin diameter | Ø0.80mm | |
| Pin projection | 3.50±0.30mm | |
| PCB hole diameter | Ø1.20mm | Not specified |
| Dimension | TB11-350R/3.5 | TB17-350R/3.96 |
|---|---|---|
| Body length | [3.5N]mm | [3.96N]mm |
| First-to-last pin span | 3.5(N−1)mm | 3.96(N−1)mm |
| Pin pitch | 3.50mm | 3.96mm |
| End-to-first-pin reference | 1.75mm | 1.98mm |
| Body cross-section references | 7.00mm × 8.75mm, as oriented in the drawing | |
| Pin diameter | Ø0.80mm | |
| Pin projection | 3.20±0.30mm | |
| PCB hole diameter and transverse edge reference | Not specified | |
Individual dimension tolerances take precedence over these general values.
| Dimension range | Total pitch tolerance | Nominal dimension tolerance |
|---|---|---|
| Over 0mm to 30mm | ±0.18mm | ±0.20mm |
| Over 30mm to 53mm | ±0.20mm | ±0.25mm |
| Over 53mm to 70mm | ±0.25mm | ±0.30mm |
| Over 70mm to 90mm | ±0.30mm | ±0.35mm |
| Over 90mm to 115mm | ±0.35mm | ±0.44mm |
| Over 115mm to 150mm | ±0.44mm | ±0.55mm |
| Over 150mm to 200mm | ±0.55mm | ±0.70mm |
| Over 200mm to 250mm | ±0.70mm | ±0.80mm |
| Over 250mm to 320mm | ±0.75mm | ±0.90mm |
| Geometric characteristic | Applicable dimension | Tolerance |
|---|---|---|
| Perpendicularity | 0–10mm | 0.2mm |
| Over 10mm | 0.3mm | |
| Symmetry | All | 0.3mm |
| Straightness | Over 0mm to 100mm | 0.2mm |
| Parallelism | Over 100mm to 150mm | 0.3mm |
| Over 150mm | 0.5mm |
