35 Series 8.25mm Barrier Terminal Blocks

35C A Centered Pin Terminal with Mounting Ends
35C B Centered Pin Terminal
35S A Offset Pin Terminal with Mounting Ends
35S B Offset Pin Terminal
35H A Solder Lug Terminal with Mounting Ends
35H B Solder Lug Terminal
35R A Bent Pin Terminal with Mounting Ends
35R B Bent Pin Terminal

Series Part Number

Part Number: ULO - TB43 - 35C / A - 02 P - 3 100A
Explanation:

Manufacturer

ULO - ULO Electronics

Series

TB43 - 8.25mm barrier terminal blocks

Terminal Type

35C - Centered straight PCB pins
35S - Offset straight PCB pins
35H - Perforated solder lugs
35R - Right-angle PCB pins

Mounting Ends

A - With mounting ends
B - Without mounting ends

Poles

02–24 - 2–24 poles, written with two digits

Pole Unit

P - Poles

Color

1 - Grey
2 - Blue
3 - Black
4 - Green
5 - Orange
6 - Red
7 - Transparent
8 - Yellow
9 - White

Customer Code

100A - Fixed customer requirements code shown in the drawings

Description

Choose the termination and mounting ends

The TB43-35 series provides one row of screw connections at 8.25mm pitch. Choose C for centered straight PCB pins, S for offset straight PCB pins, H for perforated solder lugs, or R for bent PCB pins. The /A housing includes mounting ends; /B omits them. These eight configurations have individual drawings and different terminal positions.

ModelTerminationHousing endsIEC voltage, category III / pollution degree 2
ULO-TB43-35C/ACentered straight PCB pinsWith mounting ends320V
ULO-TB43-35C/BWithout mounting ends
ULO-TB43-35S/AOffset straight PCB pinsWith mounting ends
ULO-TB43-35S/BWithout mounting ends
ULO-TB43-35H/APerforated solder lugsWith mounting ends250V
ULO-TB43-35H/BWithout mounting ends
ULO-TB43-35R/ARight-angle PCB pinsWith mounting ends
ULO-TB43-35R/BWithout mounting ends

Electrical ratings and wire connection

ModelsIEC currentOvervoltage categoryPollution degreeIEC voltageImpulse voltage
35C/A, 35C/B, 35S/A, 35S/B24AIII3Not specified6kV
2320V
IINot specified
35H/A, 35H/B, 35R/A, 35R/BIII34kV
2250V
IINot specified
UL characteristic, all eight modelsUse group BUse group CUse group D
Rated current20ANot specified10A
Rated voltage300V300V
Wire range22–12AWG
Connection characteristicAll eight models
Pitch / poles / rows8.25mm / 2–24 poles / 1 row
Connection methodScrew connection
Solid conductor0.5–2.5mm²
Flexible conductor0.5–2.5mm²
Flexible conductor with ferrule0.5–2.5mm²
Clamping screw / tightening torqueM3 / 0.5N·m
Separate fixing screw / fixing torqueNot specified
Wire stripping lengthNot specified

Materials and operating conditions

CharacteristicAll eight models
HousingPA66, insulation material group I
FlammabilityUL94V-0
Contact material / finishTin-plated copper alloy
Solder terminalTin-plated brass
Screw material / finishNickel-plated steel
Operating temperature-40°C to +105°C
Protection levelIP20
Environmental statementRoHS compliance

Ordering

The model format is ULO-TB43-35C/A-XXP-Y100A, with 35C/A replaced by the required C/A, C/B, S/A, S/B, H/A, H/B, R/A or R/B variant. XX is the two-digit pole count from 02 to 24; Y is the color code. The general field legend also describes screw head and clamping orientation fields.

FieldMeaning
Color code1 gray; 2 blue; 3 black; 4 green; 5 orange; 6 red; 7 transparent; 8 yellow; 9 white
Screw head code0 slotted; 1 cross
Screw clamping code0 screw down; 1 screw up
0AStandard product

Dimensions and mounting

Dimensions below are in millimeters. N is the number of poles. All eight models have 13.70mm housing depth and 15.20mm body height, excluding projecting terminals. The A and B housings have different length formulas; use the matching drawing for the selected termination.

Dimension/A housing/B housing
Overall length8.25 × (N + 2)8.25 × (N − 1) + 10.15
Central body length8.25 × N + 1.76Same as overall length
First-to-last terminal span8.25 × (N − 1)
Housing mounting openingsØ3.50 / Ø5.50 as drawnNo mounting ends
Terminal typeSectionProjectionLayout detail
35C/A, 35C/B1.00 × 0.803.50 ±0.30Centered row; 6.85 from the housing edge; Ø1.60 PCB holes
35S/A, 35S/BOffset row; 3.10 from the nearer edge, 10.60 from the opposite edge; Ø1.60 PCB holes
35H/A, 35H/B3.00 × 0.809.90 ±0.30Perforated lug with 1.50 × 2.50 slot
35R/A, 35R/B3.00 × 0.80 shoulder; 1.00 tip width3.50 ±0.30 horizontal reach; 3.20 ±0.30 vertical dropBent terminal; Ø1.60 PCB holes
35C/A terminal outline and PCB pattern
35C/A: centered straight pins with mounting ends and 6.85mm pin-row offset.
35C/B terminal outline and PCB pattern
35C/B: centered straight pins without mounting ends.
35S/A terminal outline and PCB pattern
35S/A: offset pins with mounting ends. The PCB pin row is 10.60mm from one edge and 3.10mm from the other; the PCB mounting holes are marked Ø3.00mm.
35S/B terminal outline and PCB pattern
35S/B: offset pins without mounting ends; the footprint marks 3.10mm from the nearer edge.
35H/A solder lug terminal dimensions
35H/A: mounting ends and perforated solder lugs projecting 9.90±0.30mm.
35H/B solder lug terminal dimensions
35H/B: perforated solder lugs without mounting ends.
35R/A bent pin terminal outline and PCB pattern
35R/A: mounting ends and bent PCB terminals; use the side view to position the board.
35R/B bent pin terminal outline and PCB pattern
35R/B: bent PCB terminals without mounting ends.

Drawing tolerances

These general drawing tolerances apply where no individual tolerance is shown. Values are in millimeters.

Dimension rangeTotal pitch toleranceNominal dimension tolerance
Over 0 to 30±0.18±0.20
Over 30 to 53±0.20±0.25
Over 53 to 70±0.25±0.30
Over 70 to 90±0.30±0.35
Over 90 to 115±0.35±0.44
Over 115 to 150±0.44±0.55
Over 150 to 200±0.55±0.70
Over 200 to 250±0.70±0.80
Over 250 to 320±0.75±0.90
Geometric toleranceApplicable rangeValue
Perpendicularity0–100.20
Over 100.30
SymmetryAll0.30
StraightnessOver 0 to 1000.20
ParallelismOver 100 to 1500.30
Over 1500.50

Documents