24H-A 7mm Pluggable Barrier Terminal Block

Series Part Number

Part Number: ULO - TB44 - 24H / A - 07 P - 3 100A
Explanation:

Brand

ULO - Product brand

Series Code

TB44 - 24H/A terminal block series

Model

24H - Pluggable barrier terminal block at 7mm pitch; this breakdown covers the black seven-pole configuration

Model Suffix

A - Fixed 24H/A configuration

Positions

07 - 7 poles, arranged on two levels as 4+3

Position Unit

P - Poles

Color

3 - Black; illustrated seven-pole configuration

Product Version

100A - Standard product configuration

Description

Pluggable barrier terminals at 7mm pitch

The 24H-A/7.0 is a screw-connected pluggable barrier-terminal family with 7- and 18-pole options. The illustrated 7-pole configuration places four terminals on one level and three on the other, with a staggered layout and a hinged cover.

ModelSeries codePitchPole optionConfiguration detail
24H-A/7.0TB447mm7Two staggered terminal levels, 4+3 positions; hinged cover and M3 fixing hardware
18Pole-count option; outline and terminal arrangement are not illustrated here

Electrical and wiring data

PropertyValueCondition or scope
IEC rated current and voltage15A, 320VOvervoltage category III, pollution degree 2
Impulse voltage4kVIEC category III, pollution degree 2
UL rated current and voltage10A, 300VUse group B
UL wire range28–12AWGScrew-connected conductors
Solid conductor cross section2.5mm²Stated conductor size
Flexible conductor cross section2.5mm²
Flexible conductor with ferrule2.5mm²
Clamping screwM3Wire connection
Clamping torque0.5N·m
Dielectric withstand1500VAC for 1 minute7-pole configuration

The 2.5mm² value is a stated cross section, rather than a documented minimum-to-maximum range. Strip length and UL groups C/D are not specified.

Materials and service conditions

PropertySpecificationScope
HousingPA66, UL94V-0Family
Insulation material groupI
Protection levelIP20
Operating temperature-40°C to 105°C
Low and high contact clipsNickel-plated phosphor bronze7-pole construction
Terminal and short fixing screwsNickel-plated steel, M3
Hex nutsM3, nickel-plated
CoverPC
RoHS complianceSpecified
Contact materialTin-plated brass18-pole option

7-pole dimensions and arrangement

The dimensions below apply to the 7-pole unit. They are not a dimensional definition of the 18-pole option. All values are in millimetres.

Drawing featureDimension
Terminal pitch within each level7
Stagger between levels3.5
Four-terminal span21
Three-terminal span14
Fixing-centre span27.9
Front-view width35.4
Opposite-view width35.5
Front-view height references19 and 20.1
Open-cover side extent46.5
Side-view length references30.8, 28.7 and 14.6
Side-view detail references4, 1.45 and 3.7
Opposite-view vertical references8.4, 9.6 and 14.2
Fixing threadM3
Fixing-end detail reference5
24H-A 7-pole barrier terminal outline and section
7-pole outline, section A–A and fixing details. Four upper terminals and three lower terminals are staggered by 3.5mm; the two outer lower screws are fixing hardware.

7-pole drawing tolerances

General tolerances apply where the drawing does not assign an individual value. Ranges and deviations below are in millimetres.

Dimension rangeTotal pitch toleranceNominal dimension tolerance
0–30±0.18±0.20
>30–53±0.20±0.25
>53–70±0.25±0.30
>70–90±0.30±0.35
>90–115±0.35±0.44
>115–150±0.44±0.55
>150–200±0.55±0.70
>200–250±0.70±0.80
>250–320±0.75±0.90
Geometric propertyRangeTolerance
PerpendicularityUp to 10mm0.2mm
Over 10mm0.3mm
SymmetryAll dimensions0.3mm
StraightnessUp to 100mm0.2mm
Parallelism100–150mm0.3mm
Over 150mm0.5mm

Ordering

Specify the full 24H-A/7.0 model and select 7 or 18 poles explicitly. The black 7-pole drawing identifies the configuration as TB44–24H/A–07P–3100A. Match the complete interface and fixing arrangement when choosing the mating component.

Colour codeColour
1Grey
2Blue
3Black
4Green
5Orange
6Red
7Transparent
8Yellow
9White