| Part Number: | ULO | - | TB | - | 230 | - | 02 | P | - | 1 | 000A |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Explanation: |
Brand |
Series Code |
Model 230 - 8.0mm pitch |
Poles 02–12 - Two-digit count from 2 to 12 poles |
Pole Suffix |
Colour 1 - Grey |
Customer Requirements 000A - Standard suffix shown in the two scoped drawings |
The 230, 230WP, 500 and 500WP models provide single-row screw connections in strips of 2–12 poles. Select the full model designation: the WP variants have their own dimensions and specifications. All four models have an IP20 protection rating.
| Model | Pitch | Poles | Terminal screw | Tightening torque |
|---|---|---|---|---|
| 230 | 8mm | 2–12 | M2.5 | 0.4N·m |
| 230WP | ||||
| 500 | 10.1mm | M3 | 0.5N·m | |
| 500WP | 10mm |
| Model | Overvoltage category | Pollution degree | Rated current | Rated voltage | Rated impulse voltage |
|---|---|---|---|---|---|
| 230 | III | 2 | 32A | 450V | 4kV |
| 230WP | Not specified | 24A | |||
| 500 | 2 | 32A | |||
| 500WP | Not specified | 6kV |
| Models | Use group | Rated current | Rated voltage | Wire range |
|---|---|---|---|---|
| 230 and 500 | B | 20A | 300V | 22–12AWG |
| C and D | Not specified | |||
| 230WP | B | 20A | 300V | 22–12AWG |
| 500WP | 30A | 22–10AWG | ||
| Parameter | All four models |
|---|---|
| Rated solid-conductor cross section | 4mm² |
| Rated flexible-conductor cross section | 4mm² |
| Rated flexible-conductor cross section with ferrule | 4mm² |
| Connection method | Screw connection |
| Number of rows | 1 |
| Protection rating | IP20 |
| Operating temperature | -40°C to +105°C |
| Stripping length | Not specified |
| Separate mounting screw and torque | Not specified |
The metric rated cross sections and UL wire ranges are separate specifications. Apply the tightening torque for the selected model.
| Parameter | 230 and 500 | 230WP and 500WP |
|---|---|---|
| Housing material | PA66 | |
| Flammability grade | UL94V-2 | UL94V-0 |
| Insulation material group | I | |
| Current-carrying component | Zinc-plated steel | Tin-plated copper alloy |
| RoHS compliance | Declared | Not specified |
| Screw material | Zinc-plated steel | Not specified |
Specify 230, 230WP, 500 or 500WP and the required pole count. Keep the WP suffix in the selected model code.
| Field | Selection |
|---|---|
| Pole count | 02P–12P |
| Colour code | 1: Grey; 2: Blue; 3: Black; 4: Green; 5: Orange; 6: Red; 7: Transparent; 8: Yellow; 9: White |
| Customer requirement suffix for 230 and 500 | 00A standard designation |
Dimensions below are in millimetres. N denotes pole count; the 230WP drawing uses P for the same pole-count variable in its overall-length expression.
| Model | Overall length | Depth | Height |
|---|---|---|---|
| 230 | 8×(N−1)+6.3 | 18.10 | 12.10 |
| 230WP | 8×(N−1)+5.50 | 17.70 | 14.70 |
| 500 | 10.1×(N−1)+6.5 | 20.00 | 16.60 |
| 500WP | 10×(N−1)+6.60 | 16.50 |
The following tolerances apply to the attached 230 and 500 drawings where an individual tolerance is not indicated.
| Dimension range | Total pitch tolerance | Nominal dimension tolerance |
|---|---|---|
| Over 0mm to 30mm | ±0.18mm | ±0.20mm |
| Over 30mm to 53mm | ±0.20mm | ±0.25mm |
| Over 53mm to 70mm | ±0.25mm | ±0.30mm |
| Over 70mm to 90mm | ±0.30mm | ±0.35mm |
| Over 90mm to 115mm | ±0.35mm | ±0.44mm |
| Over 115mm to 150mm | ±0.44mm | ±0.55mm |
| Over 150mm to 200mm | ±0.55mm | ±0.70mm |
| Over 200mm to 250mm | ±0.70mm | ±0.80mm |
| Over 250mm to 320mm | ±0.75mm | ±0.90mm |
| Geometric characteristic | Applicable dimension | Tolerance |
|---|---|---|
| Perpendicularity | 0–10mm | 0.2mm |
| Over 10mm | 0.3mm | |
| Symmetry | All | 0.3mm |
| Straightness | Over 0mm to 100mm | 0.2mm |
| Parallelism | Over 100mm to 150mm | 0.3mm |
| Over 150mm | 0.5mm |
Individual technical drawings are attached for 230 and 500. Separate dimension and section figures are provided above for both WP variants.
