| Part Number: | ULO | - | TB01 | - | 15KNVHG | / | 3.5 | - | 2 | x | 06 | P | - | 4 | 000A |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Explanation: |
Code Prefix |
Series TB01 - 3.5mm pitch |
Header Configuration 15KNVH - Vertical dual-row header, plain body |
Pitch 3.5 - 3.5mm; TB01 only |
Row Format 2 - Two rows; include the following x on TB01 codes |
Contacts per Row 02–24 - 2–24 contacts per row, 4–48 total; all covered configurations except TB13-15KNVHM |
Count Suffix P - Contact-count suffix |
Color 1 - Gray |
Configuration Tail 000A - Fixed customer-requirement field on the covered PDF codes; no separate screw or clamping options are assigned here |
15KN headers provide two aligned contact rows in 3.5mm and 3.81mm pitches. Select vertical VH or right-angle RH orientation, then the plain, M flanged or G hook version. The range covers 4–48 total contacts, normally 2×2 through 2×24. Match the exact mating connector, keying, retention features and pitch; the two pitches are not interchangeable.
| IEC condition | Rated voltage | Rated current | Impulse voltage |
|---|---|---|---|
| Overvoltage category III, pollution degree 3 | 160V | 8A | 2.5kV |
| Overvoltage category III, pollution degree 2 | |||
| Overvoltage category II, pollution degree 2 | 250V |
| UL use-group scope | Rated current | Rated voltage |
|---|---|---|
| Group B, all models | 8A | 300V |
| Group D, all except TB13-15KNVHM/3.81 | ||
| Group D, TB13-15KNVHM/3.81 | Unspecified | Unspecified |
| Group C |
The model drawings specify a separate 1600VAC dielectric test for 1 minute. Certification file numbers are unspecified. Rated voltages depend on their stated conditions and are not interchangeable with the dielectric test.
| Property | Value |
|---|---|
| Rows / arrangement | Two aligned rows |
| Protection | IP20 |
| Operating temperature | -40°C to +105°C |
| Housing | PA66, material group I, UL94V-0 |
| Solder pins | Tin-plated brass, 0.80mm square |
| Tail length | 2.60±0.30mm |
| Vertical PCB row spacing | 8.30mm |
| Right-angle PCB row spacing | 3.50mm |
| Mating-row spacing | 8.30mm |
| Environmental declaration | RoHS compliance stated in drawings |
Most PCB drawings specify Ø1.40mm holes. The TB01-15KNVHM/3.5 sheet does not dimension hole diameter, so that detail remains unspecified for this exact drawing. M versions show threaded inserts; thread size and tightening torque are unspecified. The 3.81mm M drawings identify brass nuts.
| 3.5mm model | 3.81mm model | Orientation / retention |
|---|---|---|
| TB01-15KNVH/3.5 | TB13-15KNVH/3.81 | Vertical, plain body |
| TB01-15KNVHM/3.5 | TB13-15KNVHM/3.81 | Vertical, mounting flanges |
| TB01-15KNVHG/3.5 | TB13-15KNVHG/3.81 | Vertical, retaining hooks |
| TB01-15KNRH/3.5 | TB13-15KNRH/3.81 | Right-angle, plain body |
| TB01-15KNRHM/3.5 | TB13-15KNRHM/3.81 | Right-angle, mounting flanges |
| TB01-15KNRHG/3.5 | TB13-15KNRHG/3.81 | Right-angle, retaining hooks |
The 3.81mm flanged right-angle model is TB13-15KNRHM/3.81. Its matching drawing and product identifier take precedence over an inconsistent TB01 heading.
Specify the full model and pitch, positions per row and total contacts, body retention, color and any custom suffix. The drawing format uses 2×XXP for two rows; some 3.81mm order diagrams shorten the count field, so state both row count and total contacts explicitly.
| Color code | Color |
|---|---|
| 1 | Gray |
| 2 | Blue |
| 3 | Black |
| 4 | Green |
| 5 | Orange |
| 6 | Red |
| 7 | Transparent |
| 8 | Yellow |
| 9 | White |
The general ordering legend also includes generic screw-head 0 slot / 1 cross and clamping 0 down / 1 up fields, plus 0A standard-product notation. Those generic fields do not establish screw wire termination on these PCB headers or supersede the exact header drawing.
Here n means positions per row, not the total contacts. Main-body or overall-length labels must be used with their indicated endpoints. The ordinary sectional references are 15.30mm and 13.30mm before rotating the mating orientation.
| Model | Length reference, mm | End and mounting notes |
|---|---|---|
| TB01-15KNVH/3.5 | Main body 3.5(n−1)+4.6 in PDF; supplementary outline lists +5.0 | PDF main end 2.30; supplementary end 2.50; PDF PCB 3.60 reference has an unclear outer endpoint |
| TB01-15KNVHM/3.5 | Overall 3.5n+10.2 | Four insert positions; PCB central-body end reference 2.30 is not the complete flange offset |
| TB01-15KNVHG/3.5 | Main body 3.5(n−1)+4.6 | Main end 2.30; outer hook reference 3.60 |
| TB01-15KNRH/3.5 | 3.5(n−1)+5.0 | End 2.50; PCB rows 3.50; rear-body reference 9.30 |
| TB01-15KNRHM/3.5 | Overall 3.5n+10.2 | Four insert positions; PCB central-body end 2.50; 9.30/9.40mm side references in different views |
| TB01-15KNRHG/3.5 | Main body 3.5(n−1)+4.6 | Hook-to-pin reference 3.60; PCB-envelope end reference 2.50 |
TB01-15KNVH/3.5's unclear 3.60mm extension must not be treated as a verified body-edge offset. Its exact overall envelope remains unestablished. Retaining this dimensional reference does not resolve the endpoint ambiguity.
| Model | Length reference, mm | Mounting notes |
|---|---|---|
| TB13-15KNVH/3.81 | Main body 3.81(n−1)+4.4 | PDF row spacing 8.30; main end 2.20; outer tab reference 2.45; PCB edge reference 3.00 |
| TB13-15KNVHM/3.81 | 32.85 for the illustrated 2×6 contacts | 19.05 contact span; 6.90 overall end-to-contact; 4.20 insert-to-contact; row spacing 8.30 |
| TB13-15KNVHG/3.81 | Main body 3.81(n−1)+4.4 | 2.20 main end; 1.32 hook projection; 2.80 hook-height reference |
| TB13-15KNRH/3.81 | Main body 3.81(n−1)+4.4; outer-tab outline 3.81(n−1)+4.90 | 2.20 main end / 2.45 outer reference; PCB rows 3.50 |
| TB13-15KNRHM/3.81 | Overall 3.81(n−1)+13.8 | End 6.90; insert-to-contact 4.20; original mounting span printed 3.8(n−1)+8.4 |
| TB13-15KNRHG/3.81 | Main body 3.81(n−1)+4.4 | End 2.20; hook projection 1.32; hook-height reference 1.90; PCB rows 3.50 |
TB13-15KNVH/3.81's older outline shows 8.40mm rows, a 4.50mm PCB edge reference and +4.30mm length allowance. Use the model PDF's 8.30mm, 3.00mm and +4.40mm references for its illustrated geometry; the original supplementary outline remains visible and does not establish the same clearance boundary. TB13-15KNVHM/3.81 dimensions apply only to the illustrated 12-contact version; other counts remain available in the listed range without an inferred overall-length formula. TB13-15KNRHM/3.81's mounting-span coefficient is printed as 3.8 rather than 3.81; preserve that original approximation and use a resolved option drawing for precision mounting.
Apply an explicitly dimensioned tolerance before these general tables. All values below are in millimeters; they describe drawing tolerances and do not settle an unclear measurement endpoint.
| Dimension range | Total pitch tolerance | Nominal dimension tolerance |
|---|---|---|
| Over 0 to 30 | ±0.18 | ±0.20 |
| Over 30 to 53 | ±0.20 | ±0.25 |
| Over 53 to 70 | ±0.25 | ±0.30 |
| Over 70 to 90 | ±0.30 | ±0.35 |
| Over 90 to 115 | ±0.35 | ±0.44 |
| Over 115 to 150 | ±0.40 | ±0.55 |
| Over 150 to 200 | ±0.55 | ±0.70 |
| Over 200 to 250 | ±0.70 | ±0.80 |
| Over 250 to 320 | ±0.75 | ±0.90 |
| Geometric control | Range | Tolerance, mm |
|---|---|---|
| Perpendicularity | All | 0.20 |
| Symmetry | Over 0 to 10 | 0.20 |
| Over 10 | 0.30 | |
| Straightness | All | 0.20 |
| Parallelism | Over 0 to 100 | 0.30 |
| Over 100 to 150 | 0.50 |
Each of the twelve attached PDFs belongs to its named model and pitch. Retain the exact count, mounting features and original dimensional limitations when using them.
