| Part Number: | ULO | - | TB01 | - | 15KDM | / | 3.5 | - | 02 | P | - | 4 | 000A |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Explanation: |
Brand ULO - Product brand |
Series Code TB00 - 2.5mm, 15KD only |
Model 15KD - Spring terminal plug without screw fixing flanges; all three pitches |
Pitch 2.5 - 2.5mm; TB00, 15KD, 001A suffix |
Positions 02-24 - 2-24 poles; use a two-digit code |
Position Unit P - Poles |
Color 1 - Gray |
Product Version 000A - Drawing configuration for 3.5mm and 3.81mm |
15KD plugs combine straight-through spring connections with individual release buttons. Select 2.5mm, 3.5mm or 3.81mm pitch and a 2–24 pole configuration. The 15KDM versions add end flanges with fixing screws. Pitch, pole count and the mating profile must match the corresponding connector.
| Model | Pitch | Poles | Fixing arrangement |
|---|---|---|---|
| TB00-15KD/2.5 | 2.5mm | 2–24 | Without screw fixing flanges |
| TB01-15KD/3.5 | 3.5mm | ||
| TB01-15KDM/3.5 | End flanges with fixing screws | ||
| TB13-15KD/3.81 | 3.81mm | Without screw fixing flanges | |
| TB13-15KDM/3.81 | End flanges with fixing screws |
IEC ratings below apply at overvoltage category III and pollution degree 2. UL values apply separately to each of use groups B, C and D.
| Models | IEC current / voltage | Impulse voltage | UL B, C and D current / voltage | UL wire range |
|---|---|---|---|---|
| TB00-15KD/2.5 | 5A / 250V | 2.5kV | 4A / 150V in each group | 26–20AWG |
| TB01-15KD/3.5, TB01-15KDM/3.5, TB13-15KD/3.81, TB13-15KDM/3.81 | 12A / 250V | 8A / 300V in each group | 28–16AWG |
| Models | Solid conductor | Flexible conductor | Flexible conductor with ferrule | Stripping length |
|---|---|---|---|---|
| TB00-15KD/2.5 | 0.2–0.5mm² | 0.2–0.5mm² | 0.2–0.5mm² | 8mm |
| TB01-15KD/3.5, TB01-15KDM/3.5, TB13-15KD/3.81, TB13-15KDM/3.81 | 0.2–1.5mm² | 0.2–1.5mm² | 0.2–1.5mm² | 9mm |
The spring connection does not use a wire-clamping screw. TB01-15KDM/3.5 has M2.5 flange fixing screws with a specified tightening torque of 0.4N·m. The fixing screw size and torque for TB13-15KDM/3.81 are not specified.
| Part or property | TB00-15KD/2.5 | 3.5mm and 3.81mm models |
|---|---|---|
| Housing, cover and operating button | PA66, UL94V-0 | |
| Current-carrying clamp | Tin-plated phosphor bronze | Nickel-plated phosphor bronze |
| Spring | Stainless steel | |
| Fixing screws | Not fitted | Zinc-plated steel on 15KDM models |
| Insulation material group | I | |
| Protection degree | IP20 | |
| Operating temperature | -40°C to +105°C | |
| Environmental conformity | RoHS compliance | |
P is the pole count. TB00-15KD/2.5 has a body length of 2.50 × P + 0.60mm, a pole-centre span of 2.50 × (P − 1)mm, an overall height of 19.2mm and a depth of 11.8mm. The mating-end projection is 5.80mm.
| Dimension | TB01-15KD/3.5 | TB01-15KDM/3.5 |
|---|---|---|
| Core body length | 3.5 × P + 0.8mm | 3.5 × P + 0.8mm, excluding flanges |
| Pole-centre span | 3.5 × (P − 1)mm | |
| Edge to first pole centre | 2.15mm | |
| Overall height | 20.80mm | |
| Body depth | 12.40mm | |
| Upper body height excluding mating end | Not separately dimensioned | 14.20mm |
| Mating-end projection | 6.60mm | |
| Mating profile outer / inner width | 5.40mm / 4.10mm | |
| Section reference height below button | 19.30mm | |
The overall flange-to-flange length of TB01-15KDM/3.5 is not dimensioned. The core body length excludes those end flanges.
| Dimension | TB13-15KD/3.81 | TB13-15KDM/3.81 |
|---|---|---|
| Core body length | 3.81 × P + 1.12mm | 3.81 × (P − 1) + 4.6mm, excluding flanges |
| Pole-centre span | 3.81 × (P − 1)mm | |
| Flange projection at each end | Not fitted | 4.90mm |
| Overall height | 20.80mm | |
| Body depth | 12.40mm | |
| Mating-end projection | 6.60mm | |
| Mating profile outer / inner width | 5.40mm / 4.10mm | |
| Section reference height below button | 19.30mm | |
The TB13-15KD/3.81 outline also identifies a 2.31mm near-edge-to-first-pole reference. Use the complete core-length formula for the overall body width.
Specify the complete model, 02–24 pole count, colour code and any customer option code. Retain the M suffix when screw fixing flanges are required.
| Colour code | Colour |
|---|---|
| 1 | Grey |
| 2 | Blue |
| 3 | Black |
| 4 | Green |
| 5 | Orange |
| 6 | Red |
| 7 | Transparent |
| 8 | Yellow |
| 9 | White |
