| Part Number: | ULO | - | TB13 | - | 15CB | / | 3.81 | - | 02 | P | - | 4 | 000A |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Explanation: |
Brand ULO - Product brand |
Series Code TB13 - 15CB connector series |
Model 15CB - Flange-mount pluggable interface connector with solder lugs |
Pitch 3.81 - 3.81mm |
Positions 02-24 - 2-24 poles; use a two-digit code |
Position Unit P - Poles |
Color 1 - Gray |
Product Version 000A - Standard product |
The TB13-15CB/3.81 provides a single straight row of mating contacts at 3.81mm pitch, with 2–24 poles. Its mounting flange includes fixing features and M2.5 nuts. Long slotted solder tails project from the rear in alternating depth positions.
Select the pole count and check the complete flange and contact arrangement. This connector has slotted lugs rather than a conventional short-pin PCB footprint; no PCB drill pattern or mating-plug designation is specified.
| Rating condition | Current | Voltage | Impulse voltage |
|---|---|---|---|
| IEC, overvoltage category II, pollution degree 2 | 12A | 320V | 2kV |
| UL use group B | 15A | 300V | Not specified |
| UL use group D | 10A |
UL group C and other IEC overvoltage-category/pollution-degree combinations are not specified.
| Property | Specification |
|---|---|
| Housing | PA66, UL94V-0 |
| Insulation material group | I |
| Contacts | Tin-plated brass |
| Fixing nuts | Steel, M2.5 |
| Protection level | IP20 |
| Operating temperature | -40°C to 105°C |
| RoHS compliance | Specified |
N is the total number of poles. Dimensions below are in millimetres. The flange, inset body and fixing features use different longitudinal spans; follow the dimension arrows in the drawing when laying out the mounting interface.
| Feature | Dimension |
|---|---|
| Contact pitch | 3.81 |
| Contact-row span | 3.81(N−1) |
| Overall flange length | 3.81(N−1)+18.2 |
| Inset body length | 3.81(N−1)+14.34 |
| Upper mounting reference span, as indicated | 3.81(N−1)+10 |
| Lower fixing-nut centre span | 3.81(N−1)+8.8 |
| Flange depth | 16.2 |
| Overall height including tails | 20.4 |
| Side-view references | 8 and 7.5 |
| Solder-tail projection | 9.4±0.3 |
| Tail thickness reference | 0.8 |
| End fixing references | 5 and 4.4 |
| Lower-view end references | 4.05, 2.9 and 1.9 |
| Lower-view transverse references | 0.7, 1.7 and 2.9 |
Individual tolerances take precedence. General values below are in millimetres.
| Dimension range | Total pitch tolerance | Nominal dimension tolerance |
|---|---|---|
| 0–30 | ±0.18 | ±0.20 |
| >30–53 | ±0.20 | ±0.25 |
| >53–70 | ±0.25 | ±0.30 |
| >70–90 | ±0.30 | ±0.35 |
| >90–115 | ±0.35 | ±0.44 |
| >115–150 | ±0.44 | ±0.55 |
| >150–200 | ±0.55 | ±0.70 |
| >200–250 | ±0.70 | ±0.80 |
| >250–320 | ±0.75 | ±0.90 |
| Geometric property | Range | Tolerance |
|---|---|---|
| Perpendicularity | Up to 10mm | 0.2mm |
| Over 10mm | 0.3mm | |
| Symmetry | All dimensions | 0.3mm |
| Straightness | Up to 100mm | 0.2mm |
| Parallelism | 100–150mm | 0.3mm |
| Over 150mm | 0.5mm |
Specify TB13-15CB/3.81, the required 02–24 pole count and the colour-dependent Y000A suffix. The general legend includes options for other terminal types; it does not establish wire-clamping features for this solder-lug connector.
| Colour code | Colour |
|---|---|
| 1 | Grey |
| 2 | Blue |
| 3 | Black |
| 4 | Green |
| 5 | Orange |
| 6 | Red |
| 7 | Transparent |
| 8 | Yellow |
| 9 | White |
